I'm at about 2" or so, the liner itself drops at high speed for me...

Think you could make a few vent holes and put some mesh over it to keep debris out? Mine is screwed into the lip and also has like 3-4 push clips in it, so it is not going anywhere.

Here is one last pic for this thread. More can be found in my build thread, and the
Fly1Motorsports thread. Both links can be found in my signature. Any questions or comments post here or send me a PM.

http://i850.photobucket.com/albums/a...e/DSC_0236.jpg

paint them calipers black :p

Haha maybe if I ever paint the tails, I kind of like the red though.

A little trouble w/ Install
 

I attached a few pictures after the install. The fender liner did not fit up so we drilled out a bit. Also the corners didn't quite match up. Don't really know if it looks like a big deal, but I'm kinda picky so opinions are appreciated! I'll post better pictures once I wash the car! :)

I cut my fender liners a tad different, I was still able to use the very bottom screw to attach it to the skirt. I am not sure about the CF version but my fiberglass set did not have a spot to remount the hardware for the screw that goes in the corner of the bumper. I just hot glued a piece of wood there and poped a small self tapper into it.

Subd, hopefully doing this in about a month :)


Sent from my iPhone using Tapatalk

Looks awesome:tiphat:

anybody selling theirs before i buy mine? it takes 5 weeks to have them made and shipped -_-