nm, I found some places on google

Check the vendor section on the home page of the370z dot com please! Support our vendors! :tup:

What is you do not have the harness? What wires to tap other than the dome lights?

Just installed mine! Rep to u sir!

Just trying to install these guys, but my connector looks a bit different (or am i being a bimbo and looking in the wrong spot). In Australia the cars are right hand drive, so everythings a bit opposite. I removed the kick panel on the right hand side of the drivers seat and this is what I found.

http://i.imgur.com/izXDB.jpg

T - Connector won't fit?

harry the connector you are looking for should be on the left side kick panel then. Exactly opposite, you will see that the harness can only be 1 only where your remove the plug and insert the new y harness. I used a coat hanger to fish the wire behind the dash.

Sick! Just added to me list of things to do..!

Just Installed mine, 2011 Touring, MT. Everything was where the manual said, but they were NOT prewired. 1.5 hours being careful

What was not pre wired?

can someone do a youtube video on this?

Srsly? This is a really easy mod. Just take your time and enjoy yourself! Hit us up if you have any questions. I'll be happy to answer them! :tup:

I just don't understand the wiring stuff, whats a BCM ?

That's the Body Control Module that's exposed once the kick panel is removed in the passenger footwell.

There's only one place that the cable for the kick plates can plug in. Once you see the BCM and compare it to the pics in the DIY it'll all click. I'm completely wiring illiterate, yet I was able to finish this mod in a little over an hour, but only because I was taking my time.
http://www.the370z.com/members/spear...9-img-1485.jpg

Gonna do a youtube vid on the install soon.

Just did this today. Took only 20-30 mins. I love the harness that it comes with, makes install super easy.