Question: Plastidip on Inside of Wheels?

gy954 · 03-23-2012, 10:32 PM

I am getting ready to black out my wheels with PlastiDip, and have been reading the DIYs on the subject. Only one post refers to doing both sides of the wheel. What's with that?

Seems to me it makes sense to start with the wheel insides first, to get the technique down before tackling the side that really shows. But the insides do show some, so why aren't they mentioned?

TIA, and please wish me luck!

Johno · 03-28-2012, 01:50 AM

I honestly have no experience with plasti-dip. IMO I wouldnt plasti-dip the inside. Reason being is because its a rubber compound and can be easily removed. If you think about it the inside of the wheel is more susceptible to the brake grime and crud that if it isnt cleaned regularly, hardens and becomes a pain to remove. And it would suck to be washing your wheel and you go to hard and rip some of it off...

Like I said I have no experience with it but thats just my opinion.

Good Luck!!!

03-23-2012, 10:32 PM	#1 (permalink)
gy954 Base Member Join Date: Mar 2012 Location: Sonoma County, CA Posts: 163 Drives: 2011 370Z Rep Power: 181	Question: Plastidip on Inside of Wheels? I am getting ready to black out my wheels with PlastiDip, and have been reading the DIYs on the subject. Only one post refers to doing both sides of the wheel. What's with that? Seems to me it makes sense to start with the wheel insides first, to get the technique down before tackling the side that really shows. But the insides do show some, so why aren't they mentioned? TIA, and please wish me luck!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone ever Plastidip wheels before?	Masa	Wheels & Tires	139	07-15-2014 10:52 AM
New Wheels! almost here, pics inside	mikey1600	Wheels & Tires	15	03-14-2012 09:11 PM
Plastidip interior	Dwv2005	Exterior & Interior	13	03-13-2012 08:37 AM
Shall I Paint The Wheels? (Options Inside)	G37sHKS	Wheels & Tires	6	11-30-2010 09:43 AM
European members - 25% off next set of wheels from Wolfrace Wheels (coupon inside)	AK370Z	Europe	0	07-13-2009 12:45 AM

03-28-2012, 01:50 AM	#2 (permalink)
Johno Base Member Join Date: May 2010 Location: Fort Campbell, KY Age: 34 Posts: 74 Drives: '12-370Z-Silver-6SPD Rep Power: 14	I honestly have no experience with plasti-dip. IMO I wouldnt plasti-dip the inside. Reason being is because its a rubber compound and can be easily removed. If you think about it the inside of the wheel is more susceptible to the brake grime and crud that if it isnt cleaned regularly, hardens and becomes a pain to remove. And it would suck to be washing your wheel and you go to hard and rip some of it off... Like I said I have no experience with it but thats just my opinion. Good Luck!!!