Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)
-   -   370Z 40th Anniversary: Zex NoS Installtion (http://www.the370z.com/diy-section-do-yourself/32275-370z-40th-anniversary-zex-nos-installtion.html)

spdn370z 02-27-2011 05:30 PM

370Z 40th Anniversary: Zex NoS Installtion
 
Finally completed the install of Zex NoS kit on my 40th Anniversay 370Z. All went well. The Zex 07' - Current Nissan 350Z worked flawlessly (Part#82238).

Pics to come shortly.

spdn370z 02-27-2011 05:33 PM

Pics
 
10 Attachment(s)
Just need to pick up a warmer and purge kit now.

Jordo! 02-27-2011 06:04 PM

Are you running colder plugs?

Dreezy562 02-27-2011 06:47 PM

crazzy

Big J 02-27-2011 07:04 PM

It's crazy the amount of negativity people give on most import car forums about nitrous just bc they know nothing about it. Have you had it dyno'd or ran at the track yet? I wouldnt worry about colder plugs if your just running a 75 shot. Even a 100 I would not sweat it that much. NGK TR6's are what I usually run in nitrous cars. But that's usually on 125 shot and up for me. If you want some serious nitrous information, you may be a nitrous genious for all i know, check out the nitrous section on ls1tech.com.

Also, most track's require a blow down tube if the bottle is in the cab area of the car.

Big J 02-27-2011 07:06 PM

Also, what did you hook up the tpms switch on the zex box up to, or are you using another activation switch?

JC671 02-28-2011 07:09 AM

Subscribed
 
Interesed in doing this setup. What shot are you running and have you dynoed?

tyler20c 03-02-2011 04:16 PM

Did you tap your stock fuel line?

spdn370z 03-02-2011 07:46 PM

Ok guys... sorry for the delay busy end of month at work.

@ Jordo - I have not put in colder plugs yet. But I plan to before moving up to next shot.

@ Big J - I Hooked into the TPS Sensor - Only activates at full throttle.

@Messiah - 75 Shot and no dyno yet.

@Tyler - yes I tapped into the stock fuel line.

Here is a video for all that I found and found very helpful during the install. Everything went as the video described:
Power Performance TV : Zex Nitrous 2007 VQ35HR 350z Install and Dyno

Hope that helps everyone and keep the questions coming.

Big J 03-02-2011 07:53 PM

Cool. Zex kits are by far the easiest to install if anbody is interested....

CarbonSignal 03-02-2011 11:51 PM

as per my humble research on NOS, anything below 100shots on our engines doesnt need any plugs ( correct me if am wrong experts ;) )

you must be scraing those Vettes and AMG's eh !!!..

keep it safe bro.

tyler20c 03-03-2011 10:44 AM

I bought the dynotune kit for the HR 350Z and it came with a fuel line that didn't fit. I just ordered the fuel block adaptor from them so i'm hoping that will make everything fit okay. Do you plan on running yours at the drag strip?

V8Killer 03-03-2011 11:07 AM

Quote:

Originally Posted by CarbonSignal (Post 966863)
as per my humble research on NOS, anything below 100shots on our engines doesnt need any plugs ( correct me if am wrong experts ;) )

you must be scraing those Vettes and AMG's eh !!!..

keep it safe bro.

Let me know what you find out on that subject. I will be doing 100 shot in the months to come on my Z and I am curious about that. Also Does anybody know exactly what our cars can handle? I was told 100 shot is the most I should do b/c I was leaning towards a 125 after doing all my upgrades.

spdn370z 03-03-2011 01:51 PM

I will going to Dallas Raceway this Sunday to run it. I will post the times after. Gonna run it with and without NoS for a comparison.

tyler20c 03-03-2011 03:30 PM

Quote:

Originally Posted by spdn370z (Post 967763)
I will going to Dallas Raceway this Sunday to run it. I will post the times after. Gonna run it with and without NoS for a comparison.

Awesome Im very interested in the results.


All times are GMT -5. The time now is 03:54 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2