DIY: Berk Technology HFC Install

kbc749 · 05-28-2015, 04:36 PM

Alright I'm back again.

After trying 1/2 inch extensions, I have rounded off 1 bolt and have not moved the other bolt. I drove the car before trying to heat up the bolts, have put penetrating oil on both multiple times.

The error code that was thrown by my ECU is the P2A00, which is sensor 1 bank 1 error. So that's a $200 hurdle.

Does anyone have any other recommendations? My father is considering trying to pull off the side fender to get a short wrench directly on the bolt. not sure how that will work, gonna try all day Monday. Considering drilling out the bolt from the back just to get them off.

thanks,

KBC

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Berk Technology Earth Day HFC Sale!!!	BerkTech	Exhaust/Intake	8	04-16-2012 01:46 PM
Berk Technology Cat-Back Coming Soon!	M.Bonanni	Intake/Exhaust	468	08-14-2009 09:36 PM

05-28-2015, 04:36 PM	#11 (permalink)
kbc749 Base Member Join Date: Jan 2015 Location: Columbus Ohio Posts: 161 Drives: 2010 370z 6MT Rep Power: 11	Alright I'm back again. After trying 1/2 inch extensions, I have rounded off 1 bolt and have not moved the other bolt. I drove the car before trying to heat up the bolts, have put penetrating oil on both multiple times. The error code that was thrown by my ECU is the P2A00, which is sensor 1 bank 1 error. So that's a $200 hurdle. Does anyone have any other recommendations? My father is considering trying to pull off the side fender to get a short wrench directly on the bolt. not sure how that will work, gonna try all day Monday. Considering drilling out the bolt from the back just to get them off. thanks, KBC