Need DIY on putting on the CF Fang on the Z

crazybeasty · 04-02-2010, 06:21 PM

yeah it fits snugg liek i cant put it on perfect. I put it on with out the tape and it seemed fine, i just wanna kno if i take the protector off and put the tape on and i messed up and want to pull the tape out would it leave like glue behind that would be hard to get off? and cptspeed i already read that thread my cf fang is a different fang mines doesnt need screws or anything i got mine from 370z source not evo-r

cptspeed · 04-02-2010, 06:41 PM

Quote:

Originally Posted by crazybeasty

yeah it fits snugg liek i cant put it on perfect. I put it on with out the tape and it seemed fine, i just wanna kno if i take the protector off and put the tape on and i messed up and want to pull the tape out would it leave like glue behind that would be hard to get off? and cptspeed i already read that thread my cf fang is a different fang mines doesnt need screws or anything i got mine from 370z source not evo-r

My bad.

azn370z · 04-02-2010, 06:46 PM

If it's a tight fit you may not be able to use too much tape. I used two pieces of tape 1/2 inch long but mine is a real tight fit. If you need to take off Tape residue use goo gone.

04-02-2010, 06:21 PM	#1 (permalink)
crazybeasty Enthusiast Member Join Date: Mar 2010 Location: West Palm Beach,Florida Posts: 249 Drives: 09 370z Rep Power: 17	yeah it fits snugg liek i cant put it on perfect. I put it on with out the tape and it seemed fine, i just wanna kno if i take the protector off and put the tape on and i messed up and want to pull the tape out would it leave like glue behind that would be hard to get off? and cptspeed i already read that thread my cf fang is a different fang mines doesnt need screws or anything i got mine from 370z source not evo-r __________________ "2 Fast To Live, 2 Young To Die"

04-02-2010, 06:46 PM	#3 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 491	If it's a tight fit you may not be able to use too much tape. I used two pieces of tape 1/2 inch long but mine is a real tight fit. If you need to take off Tape residue use goo gone. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Where are you putting your radar detector?	LiquidZ	Nissan 370Z General Discussions	37	03-14-2012 07:12 PM
Problem putting on front winter wheels.	NXTAZEE	Wheels & Tires	19	06-18-2010 03:57 PM
Fang LED's	Osiris	Exterior & Interior	12	04-01-2010 07:55 PM
Worth putting my old ST40 332s on a new 370z?	mswc	Brakes & Suspension	2	12-09-2009 04:13 PM
What I am putting in.	bigaudiofanat	Audio & Video	2	09-05-2009 03:35 PM