DIY Removal of Door Handles

SE · 08-06-2010, 01:41 AM

Quote:

Originally Posted by TROOPER

Aren't the handles actually plasic, so they cannot be powder coated.

Correct. Plastic cannot be powdercoated as it will not retain the powder used in the powdercoating process (ie cannot be electrically charged).

XwChriswX · 08-06-2010, 01:49 AM

Victor, do you know of a shop in the SoCal/AZ area that will paint the WHOLE door handle assembly? Not just the face of it, but completely take it apart and paint all surfaces. Only quote I can get right now is just the face so when you open the handle, you see silver, and I don't want that. I want it completely color matched black.

08-06-2010, 01:49 AM	#2 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 454	Victor, do you know of a shop in the SoCal/AZ area that will paint the WHOLE door handle assembly? Not just the face of it, but completely take it apart and paint all surfaces. Only quote I can get right now is just the face so when you open the handle, you see silver, and I don't want that. I want it completely color matched black. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Door Panel Removal & Door Speaker Size	jikhead	DIY Section (Do-It-Yourself)	46	07-16-2016 10:04 PM
Door Handles Question	boomboom	Exterior & Interior	11	03-03-2010 05:08 PM
door handles	polarity	Exterior & Interior	18	09-19-2009 07:52 PM
Door handles.	Forumite	Nissan 370Z General Discussions	17	05-20-2009 07:07 PM
Door handles	ATC5079	Exterior & Interior	15	05-13-2009 07:50 PM