Nissan 370Z Forum - DIY: [How-To:] Racing Seat airbag light fix

Page 4 of 16

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)

- - DIY: [How-To:] Racing Seat airbag light fix (http://www.the370z.com/diy-section-do-yourself/10585-diy-how-racing-seat-airbag-light-fix.html)

edconline

07-18-2012 05:58 PM

Quote:

Originally Posted by sixpax (Post 1814771)

Yes. If you do the reset sequence, when you are done you will notice the dash indicator blinks two times slow, followed by 5 fast flashes. This pattern indicates the weight sensor is malfunctioning (in our case becuase it ain't hooked up) ... I am not a rocket scientist but everything I have read would indicate all air bags are functioning properly except for the passenger side. Not sure yet how I am going to fix that.

Awesome, didn't see your reply before, thanks! I'll have to pull the weight sensor out and hook it up with the new seat. Repped.

martin82

07-18-2012 06:37 PM

I will be in the same boat in 2 weeks or so, I will see if I can find impendance when someone is on the seat and without it.... see if 1) can make a toggle switch without the sensor or 2) leave it on all the time...

sixpax

07-18-2012 10:06 PM

Quote:

Originally Posted by edconline (Post 1827008)

Awesome, didn't see your reply before, thanks! I'll have to pull the weight sensor out and hook it up with the new seat. Repped.

Pleasure. It's on page SRC-182 in the service manual (2010) ... that code sequence means the classification unit is malfunctioning. Anyone changing out seats will prolly benefit from that page as it has a chart with all the sequences. :tup:

martin82

07-18-2012 10:45 PM

I know the DIY says 1/4 watt does it matter if I use a 5 watt?
I know the difference is how many watts it can take before burning up so technically it should matter right?

sixpax

07-18-2012 10:53 PM

Quote:

Originally Posted by martin82 (Post 1827342)

I know the DIY says 1/4 watt does it matter if I use a 5 watt?
I know the difference is how many watts it can take before burning up so technically it should matter right?

Technically I think that's right ... I think the 4.7 Ohms fools the system, and like you say the watts only comes into play if the system says to deploy an airbag ...

martin82

07-19-2012 12:33 AM

I will have to see but I don't even think it makes a difference if the airbag blows, other bags will still deploy no issues as long as the 4.7 ohms is there...... But I have no idea how it works. From what I remember in highschool the more watts is just that how many watts until it burns up...... Maybe someone else has more insight on this?

---
I am here: http://maps.google.com/maps?ll=34.184335,-118.349331

martin82

07-19-2012 01:29 AM

2 Attachment(s)

Picked up a 2 watt 4.7 ohm resistor frys didn't have a 1/4 watt. Also picked up crimp connectors I can stick straight into the harness or also bought a made cable I can solder the resistor too and modify the plug. Maybe this weekend I will measure ohms on the passenger seat weight sensor and see what I gotta do.... I will update again once I do

---
I am here: http://maps.google.com/maps?ll=34.157750,-118.465337

sixpax

07-19-2012 04:53 AM

Quote:

Originally Posted by martin82 (Post 1827484)

That would be cool ... I would love to fix mine so it thinks someone is sitting in the passenger seat ...

martin82

08-10-2012 01:24 PM

I have spoke with a few people, didn't get a chance to do this myself, it looks like it is not just a matter of the right resistor for passenger side, we think it is actually sending information to one of the air bag modules............ I will give it a go in the next few weeks, for now my air bag light just blinks.......

dansracing

09-18-2012 03:08 PM

Quote:

Originally Posted by martin82 (Post 1862654)

I will give it a go in the next few weeks, for now my air bag light just blinks.......

I hope you guys figure it out because I would like to put racing seats in my car but I don't want any flashing lights going on, and I really want to keep the passenger side airbag armed.

Until then, i will hold off. Great info in this thread.

Bandit_Kaine

10-13-2012 08:55 AM

Is there any update on this? I want to change out both seats without taking the weight sensor out.. But if the passenger airbag doesn't work I can't risk putting my girlfriend in the car just in case of an accident.

dansracing

10-14-2012 09:29 AM

Quote:

Originally Posted by Bandit_Kaine (Post 1959598)

From what I understand, removing the weight sensor out of the OEM seat and installing it in the new seat is pretty simple and straight forward. I have a few friends who have done it.
To me the bigger concern is getting the lights off. Either way, my seats are on the way. As soon as I get them in, I will report. Should be within two weeks.

Calvin

10-15-2012 04:44 AM

Anyone know if it's possible to buy all the harnesses separately and the weight sensor ?? Can't find my stock seats -___- been lagging on doing this bypass now that I moved back in Idk where my stuff are in the basement total mess down there still:(

FireDan50

10-15-2012 01:32 PM

I've installed the resistors and tried the reset sequence but still haven't been able to get rid of the flashing light....i don't know if it requires putting in the weight sensor, but I'm guessing it does.

shayandude

10-19-2012 10:30 AM

Any updates on the passenger side yet?
Thanks in advance.

All times are GMT -5. The time now is 04:25 AM.

Page 4 of 16

« First

Last »

Show 40 post(s) from this thread on one page