Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Canada (http://www.the370z.com/canada/)
-   -   General Chat Vancouver - July, August, September (http://www.the370z.com/canada/57477-general-chat-vancouver-july-august-september.html)

gabo 08-31-2012 05:27 PM

Quote:

Originally Posted by .c2 (Post 1895245)
Well looks like I'll be raising the front a little bit.. just hard scraped the living sh*t out of the front lip today trying to get into the parking lot of the gelato place by Richmond Centre. Stuck on a speed bump, then just backed out and just parked beside the building... Proceeded to scrape my lip and exhaust on the way out of the little bump lol. The joys of having ~7cm clearance on the front lip :(

exactly. Just do tests. lower it only .5 and drive it for couple days see if you can get away with it without rubbing.

Its a really nice lip but downside is how low it is. :shakes head:

Sena 08-31-2012 09:00 PM

That lip is awfully low. Up up up.

.c2 08-31-2012 11:12 PM

IT CLEARED :happydance::happydance::happydance:
http://a7.sphotos.ak.fbcdn.net/hphot...62156885_n.jpg
http://a2.sphotos.ak.fbcdn.net/hphot...14765684_n.jpg

Barely. For now I am super happy lol, but in the future I'm probably going to have to raise it :( Sigh and before I got the lip I was complaining that my coilovers didn't lower the car enough, since my old civic was able to tuck some tire while still having ~14mm clearance on the front lip from the ground

gabo 09-01-2012 07:55 PM

lol nice. it cleared. But how are you gonna get everywhere else? carry peaces of wood in your trunk? haha

.c2 09-04-2012 03:44 AM

Lol I can angle in mooost places.. On speed bumps I don't scrape my lip but I do scrape my exhaust :( If I angle it properly. Been scraping my lip a lot the past few days though.. want to raise it but then I would have to raise the rear as well or else it'll look uneven :( Lowest point of the front lip, on even ground. I really don't understand why they had to make the lip so low on the side but higher up in the middle, why can't they just have made it the same height all around so the sides won't scrape on everything
http://a2.sphotos.ak.fbcdn.net/hphot...08913368_n.jpg

Grand opening of my uncle's detail shop :) Parked my car beside a bunch of luxury cars that was on show for sh*ts and giggles.
http://a7.sphotos.ak.fbcdn.net/hphot...11646671_n.jpg

gabo 09-04-2012 07:00 PM

yeah i dont understand why eather but is still a really nice lip though.
the clearance of my lip is also an iphone but standing up and your is laying down. thats why you're still scrapping. Also you should check the side skirts. i think they are even lower than the front lip. check the point close to the rear tires. You'll know what i mean

gabo 09-04-2012 07:01 PM

btw, can we get good deals at your uncles detail shop?

SmallermouseZ 09-04-2012 08:13 PM

Quote:

Originally Posted by .c2 (Post 1900526)
Lol I can angle in mooost places.. On speed bumps I don't scrape my lip but I do scrape my exhaust :( If I angle it properly. Been scraping my lip a lot the past few days though.. want to raise it but then I would have to raise the rear as well or else it'll look uneven :( Lowest point of the front lip, on even ground. I really don't understand why they had to make the lip so low on the side but higher up in the middle, why can't they just have made it the same height all around so the sides won't scrape on everything
http://a2.sphotos.ak.fbcdn.net/hphot...08913368_n.jpg

Grand opening of my uncle's detail shop :) Parked my car beside a bunch of luxury cars that was on show for sh*ts and giggles.
http://a7.sphotos.ak.fbcdn.net/hphot...11646671_n.jpg

nice kit! just wondering which part of ur exhaust scrapes?

Cafiax 09-04-2012 11:40 PM

Would love some deals on detail packages :D

.c2 09-05-2012 12:17 AM

Quote:

Originally Posted by gabo (Post 1901542)
yeah i dont understand why eather but is still a really nice lip though.
the clearance of my lip is also an iphone but standing up and your is laying down. thats why you're still scrapping. Also you should check the side skirts. i think they are even lower than the front lip. check the point close to the rear tires. You'll know what i mean

I dont have the same sideskirts as you haha mine are the sideblades that attach underneath the stock sideskirt. Iirc you have the shine one right? If my sideskirt was lower than my fromt lip I'd be in a lot of trouble haha

Quote:

Originally Posted by gabo (Post 1901544)
btw, can we get good deals at your uncles detail shop?

Quote:

Originally Posted by Cafiax (Post 1901993)
Would love some deals on detail packages :D

I can always ask him for you guys :p I'll post an update here on that a bit later

Quote:

Originally Posted by SmallermouseZ (Post 1901627)
nice kit! just wondering which part of ur exhaust scrapes?

Thanks! When it was up on a lift I saw huge scrape marks on the resonators near the cats. I could of sworn I heard scraping near the rear of my exhaust but have yet to see any marks other than on the resonator

gabo 09-05-2012 01:36 AM

Quote:

Originally Posted by .c2 (Post 1902040)
I dont have the same sideskirts as you haha mine are the sideblades that attach underneath the stock sideskirt. Iirc you have the shine one right? If my sideskirt was lower than my fromt lip I'd be in a lot of trouble haha

yeah i have the full shine kit and the side skirts are lower than the lip. You wouldnt even be able to get it in your garage if you had it lol.

and how much are you planning to raise it?

.c2 09-11-2012 01:53 AM

Think I might stay at this height, starting to get used to driving around so low haha.

Does anyone here want the full stock catback for $25? Not too sure what else to do with it

.c2 09-16-2012 10:06 PM

Starting to do some sound deadening.. Ordering test pipes a few days from now :)
http://sphotos-d.ak.fbcdn.net/hphoto...99849868_n.jpg

Does anyone know how to take off the rear fog light thing? I bought an OEM rear fog light since my US imported Z doesn't have one, but I can't figure out how to get the bolts off. It just spins and spins.. I've tried heating it up but doesn't work :/ All help is greatly appreciated!

Sena 09-18-2012 01:41 AM

Wait for the next meet?


All times are GMT -5. The time now is 01:09 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2