Eibach coils and Sways installed (2013)
 

I did the sways about 2 months ago and loved them and finally had time to do the coils. The Z feels complete now and I love it. Ride feels exactly like stock until you take a hard corner and it is completely flat and stable. Looks killer too!

Having never done suspension work on any vehicle before, I found the install to be very simple for all of the parts.

Front camber is -1.6 (actually maybe -1.4) and the rear is -1.8. I like it for now but I may take the rear to like -1.4 eventually. Front sway on stiffest(front-most hole) and middle on the rear bar. SPC camber arms were needed, but not the toe bolts ;)

Also did the Z1 MAF tubes and AFE Pro dry S filters...my butt dyno says thank you:tup:

Next up I need exhaust and then some wheels! And then turbos!!!!

http://i18.photobucket.com/albums/b1...ps95377771.jpg

http://i18.photobucket.com/albums/b1...ps365720c8.jpg

http://i18.photobucket.com/albums/b1...ps6c9713f1.jpg

http://i18.photobucket.com/albums/b1...ps4100ac60.jpg

http://i18.photobucket.com/albums/b1...ps078120ef.jpg

Nice! :tup:

sexy set up...spacers or bigger wheels in the future?

bigger wheels hopefully in march/april I want those forgestar f14s:tup:

So you have SPC rears and those numbers are from an alignment shop?

Yes. I had read originally on the forum that - 1.8 was ideal for the rear and then afterwards found out - 1.0 to - 1.4 was ideal for rear. do u have any suggestion? I can bring it back for free... Made friends with the manager at a shop

Looks cool! I have been looking at those sways, happy to know they worked good for you :tup:

Depends on what you want to do with it. DD, -1.0 to -1.4 think would be fine. Track, I have mine set to -1.7.

Perfect entry level set up. Looks good!

well maybe I will leave it where it is then. it's not my daily driver and I dont know if I will track it yet, right now its just a very fun toy:happydance:

Once you get the bug. You're done. There is no 12 step program to help you stop. :eek:

God you are so right....:bowrofl:

Sway bars look great. Do you them set up with the stock end links?

yep stock endlinks for now...I wont upgrade until they break...or if I get bored:icon17:

lol, well maybe I will track it...:happydance:

Haha nice. Do they have a higher likelihood of breaking even if you were to track it once?

I would say no about breaking. I replaced mine because of them being sloppy.

Well ideal depends also on the front. And to me and everything I have ever read, ideal needs to have more negative in the front then the rear. Normally people shoot for -1.0 more in the front. Since you're at -0.2 more in the rear, I'd change that to anything below -1.6. -1.0 to -1.4 would work. If you're not tracking, less is better for tire wear and if you like to straight line sprint, less is better since you'll have more traction. However that also depends on springs and such since rear end squat changes alignment.