spacers and lowering... advice?

radek7633 · 12-02-2011, 11:10 AM

hey folks,

I am looking to do a one inch drop all around and really like the look achieved with spacers

One of my friends told me to ask if there will be clearance issues with say 25mm rear, 20 mm front spacers and the one inch drop.

I don't want to be rolling the fenders, as he said he did on his car

any advice is appreciated

cheers

Ages · 12-02-2011, 11:24 AM

Check out the spacers 101 sticky . Tons of info and a few pics also.
All my research had lead me to buy 20f 25r. Should be no problem.

radek7633 · 12-02-2011, 01:55 PM

^^^ thanks!

radek7633 · 12-02-2011, 02:14 PM

the spacers 101 was good, but didnt quite address my quiry about spacers with a 1 inch drop

anyone have any experience with this>?

Imperial · 12-09-2011, 04:14 AM

Some minor rubbing in the front on hard bumps.

edub370 · 12-13-2011, 11:32 AM

stock wheels??

vividracing · 12-13-2011, 12:10 PM

Quote:

Originally Posted by edub370

stock wheels??

^^ This.

Wheel specs and tire sizing are the biggest factors. Assuming you're running stock wheels and OEM tire sizes, you're only going to rub in the front on big bumps, or if you're at full lock and pulling into an unusually steep driveway. It'll rub the fender liners before anything else, so you're not going to do any damage to anything besides the plastic fender liners.

20 front / 25 rear looks excellent!! I recommend H&R spacers because their high quality and include hub centric rings. If you need help sourcing parts, PM me.

alejo · 12-19-2011, 01:37 PM

I have 20mm front and 25mm rear H&R, with swifts and on stock rays... no rubbing and the drop looks just perfect

zackstratford · 01-02-2012, 03:06 PM

can anyone show pics of there 1 inch drop with 20/25 spacers on stock rays

cheshirecat · 01-03-2012, 09:57 AM

here's a couple from different angles. 20mm front stud replacement (even though you can use slip-ons) and 25mm rear slip ons. H&R. Swift springs.

laricb · 01-05-2012, 05:58 PM

Trying to get an alignment after having eibach springs installed now my car is to low for any service station to lift the car any suggestons not running stock tires

zackstratford · 01-09-2012, 02:00 PM

good job on that beautiful car looks AMAZING! Thanks for the pics

Shifter · 02-21-2015, 11:24 PM

Quote:

Originally Posted by cheshirecat

here's a couple from different angles. 20mm front stud replacement (even though you can use slip-ons) and 25mm rear slip ons. H&R. Swift springs.

Cheshirecat, looks great! Any issues with the 20 & 25mm spacers, rubbing or otherwise?

mmares94 · 02-28-2015, 10:28 PM

What are stock spacers on a 09 Touring?

Leroydsouza · 02-28-2015, 10:46 PM

Current Setup :

Stock Rays
Swift Springs - Height Drop: 1.25 inches / 1.0 inches (front / rear)
H&R Spacers - 20mm / 25mm (front / rear)

No Issues. Perfect Drop and i am sure many people have this same setup.

12-02-2011, 11:10 AM	#1 (permalink)
radek7633 Base Member Join Date: Oct 2010 Location: Ontario Posts: 102 Drives: 09 Nissan 370 M6 Sp. Rep Power: 14	spacers and lowering... advice? hey folks, I am looking to do a one inch drop all around and really like the look achieved with spacers One of my friends told me to ask if there will be clearance issues with say 25mm rear, 20 mm front spacers and the one inch drop. I don't want to be rolling the fenders, as he said he did on his car any advice is appreciated cheers

12-13-2011, 11:32 AM	#6 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 19	stock wheels?? __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

12-19-2011, 01:37 PM	#8 (permalink)
alejo Base Member Join Date: May 2010 Location: Pensacola, FL Posts: 107 Drives: 10 T/S,NAV,MT, 08 R6 Rep Power: 14	I have 20mm front and 25mm rear H&R, with swifts and on stock rays... no rubbing and the drop looks just perfect __________________ SWIFTS SPEC R -- 20MM F/25MM R H&R SPACERS -- REAR SPC CAMBER ARM -- F.I. CBE 18" SS -- F.I. HFCs -- STILLEN GEN 3 INTAKES -- UPREV 310WHP STD/304WHP SAE -- Z1 25 row oil cooler -- GT-R push to start button

01-02-2012, 03:06 PM	#9 (permalink)
zackstratford Base Member Join Date: Apr 2011 Location: portland OR Posts: 55 Drives: 2011 370z MG 6spd Rep Power: 13	can anyone show pics of there 1 inch drop with 20/25 spacers on stock rays __________________ 2011 370z Gun Metallic 6Spd Sport Package 2010 Nissan Frontier PRO4X White 2004 Nissan Armada White

01-03-2012, 09:57 AM	#10 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 292	here's a couple from different angles. 20mm front stud replacement (even though you can use slip-ons) and 25mm rear slip ons. H&R. Swift springs. Zbrah and predikt like this.

12-02-2011, 11:24 AM	#2 (permalink)
Ages Base Member Join Date: Oct 2011 Location: MA Posts: 184 Drives: 11 370Z SP MT Gunmet Rep Power: 13	Check out the spacers 101 sticky . Tons of info and a few pics also. All my research had lead me to buy 20f 25r. Should be no problem.

12-02-2011, 01:55 PM	#3 (permalink)
radek7633 Base Member Join Date: Oct 2010 Location: Ontario Posts: 102 Drives: 09 Nissan 370 M6 Sp. Rep Power: 14	^^^ thanks!

12-02-2011, 02:14 PM	#4 (permalink)
radek7633 Base Member Join Date: Oct 2010 Location: Ontario Posts: 102 Drives: 09 Nissan 370 M6 Sp. Rep Power: 14	the spacers 101 was good, but didnt quite address my quiry about spacers with a 1 inch drop anyone have any experience with this>?

12-09-2011, 04:14 AM	#5 (permalink)
Imperial Enthusiast Member Join Date: Aug 2010 Location: Long Beach, CA Posts: 486 Drives: 10 Nismo 370Z PW M6 Rep Power: 14	Some minor rubbing in the front on hard bumps.

01-05-2012, 05:58 PM	#11 (permalink)
laricb Base Member Join Date: Nov 2010 Location: NYC Posts: 32 Drives: NISSAN 370Z 40TH AN Rep Power: 14	To low to jack up Trying to get an alignment after having eibach springs installed now my car is to low for any service station to lift the car any suggestons not running stock tires __________________ Stillen HFC,Stillen CBE,AEM CI,

01-09-2012, 02:00 PM	#12 (permalink)
zackstratford Base Member Join Date: Apr 2011 Location: portland OR Posts: 55 Drives: 2011 370z MG 6spd Rep Power: 13	good job on that beautiful car looks AMAZING! Thanks for the pics __________________ 2011 370z Gun Metallic 6Spd Sport Package 2010 Nissan Frontier PRO4X White 2004 Nissan Armada White

02-28-2015, 10:28 PM	#14 (permalink)
mmares94 Base Member Join Date: Feb 2015 Location: Little Rock, Arkansas Posts: 74 Drives: 09 370Z PG MT Rep Power: 10	What are stock spacers on a 09 Touring? __________________ 2009 Nissan 370z Touring Sport: Platinum Graphite: K&N CAI: Stillen Exhaust: Red GTR Button

02-28-2015, 10:46 PM	#15 (permalink)
Leroydsouza Enthusiast Member Join Date: Mar 2013 Location: Dubai Posts: 265 Drives: Nissan 370z 2014 Rep Power: 12	Current Setup : Stock Rays Swift Springs - Height Drop: 1.25 inches / 1.0 inches (front / rear) H&R Spacers - 20mm / 25mm (front / rear) No Issues. Perfect Drop and i am sure many people have this same setup. __________________ 370z 2014 7AT \|Carbon Signal - GT Edition\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spacers, lowering springs on the nismo - my pros and cons	torpedo2k	Nismo 370Z	7	06-04-2011 04:09 PM
Lowering the car	edub370	Brakes & Suspension	19	05-23-2011 04:45 PM
Fs: H&r 20mm rear spacers / 15mm front spacers	xbigb4ller69z	Parts for sale (Private Classifieds)	25	12-10-2010 12:20 PM
Lowering	Nubz	Brakes & Suspension	16	08-22-2010 12:00 PM
WTB-10mm spacers and H&R lowering springs	onefastz	Wanted	3	08-21-2010 11:46 AM