305 30 19 Tires and Spacer???

htt760 · 11-15-2010, 12:55 PM

Hey Guys,

I currently am running a 19 by 10.5 in the rear with a +12, do you think a 10mm spacer is to much for 305 30 19 tires? or is a 5mm recommended?

Thanks

Huy

the_student · 11-15-2010, 01:00 PM

I have seen a 5 mm spacer with that setup but I forget that camber value. I don't know about 10 though, but it may work if you give yourself a little more negative camber.

htt760 · 11-15-2010, 01:05 PM

thanks student.. the 5mm will save me tire in the end :-)

fuct · 11-15-2010, 01:52 PM

im told on the factory nismo rear wheel with a 305/30/19 to run a 15mm spacer. not sure what my offsets are on the nismo wheel though.... jsut a heads up

HATED1 · 11-15-2010, 02:26 PM

I run the setup mentioned with 19x10.5 +3 with the 2o mm spacer on 305/30/19, little bit of poke, but I like it, 15mm would be ideal.

Jeffblue · 11-15-2010, 02:38 PM

the most i'd do is a 5mm if the wheel is already a 10.5 +12mm

htt760 · 11-16-2010, 10:25 AM

Quote:

Originally Posted by fuct

im told on the factory nismo rear wheel with a 305/30/19 to run a 15mm spacer. not sure what my offsets are on the nismo wheel though.... jsut a heads up

Thanks Fuct...

Quote:

Originally Posted by HATED1

I run the setup mentioned with 19x10.5 +3 with the 2o mm spacer on 305/30/19, little bit of poke, but I like it, 15mm would be ideal.

I do like the poke, but im guessing it doesn't help with camber wear on the tires :-)....... What if we were to "pull" the rear fenders just a tad to give a little less negative camber?

Quote:

Originally Posted by Jeffblue

the most i'd do is a 5mm if the wheel is already a 10.5 +12mm

Thats what I was thinking... I thinking 5mm with extended studs on rear and 2mm spacer with extended studs for front?

tjlazer · 11-16-2010, 10:31 AM

If you pull the fender it's gonna look like !@#$.

HATED1 · 11-16-2010, 11:32 AM

don't pull, 5mm sounds about right, abbording to your offsets

Jeffblue · 11-16-2010, 12:00 PM

i have a set of 5mm and a set of 10mm HR stud extension type spacers that i bought and never used. I forgot to return them and then when i realized that i needed to, it was too late (30+days). Anyways, i am having coilovers and a camber kit installed this weekend, and i will see how the car looks when lowered, but i doubt i will end up using them, in which case you can buy them from me for cheaper than they'd cost new.

htt760 · 11-18-2010, 03:46 PM

Quote:

Originally Posted by tjlazer

If you pull the fender it's gonna look like !@#$.

Hmmm, okay thanks for the heads up tj... I was thinking the opposite, I thought it would look better but NM that

Quote:

Originally Posted by HATED1

don't pull, 5mm sounds about right, abbording to your offsets

5mm... sounds like the best option...

Quote:

Originally Posted by Jeffblue

i have a set of 5mm and a set of 10mm HR stud extension type spacers that i bought and never used. I forgot to return them and then when i realized that i needed to, it was too late (30+days). Anyways, i am having coilovers and a camber kit installed this weekend, and i will see how the car looks when lowered, but i doubt i will end up using them, in which case you can buy them from me for cheaper than they'd cost new.

yeah jeff.. if the price is right for the 5mm then just pm me when you find out. Are the 5mm just the plate or does it come with the regular studs with the spacer?

NISMOFO · 01-27-2011, 07:34 PM

I have 19x11" rear +24 and that is about 5.5mm farther out than yours....and I have been thinking about doing a 5mm spacer myself. 5mm will be plenty fine...plenty.

Im om eibachs and 305/30s

Old thread...sorry. curious what you decided?

hdskull · 01-27-2011, 07:54 PM

Stock nismo is 19x10.5 +23 in the back. I'm still waiting to put my 15mm spacers on!

HATED1 · 01-27-2011, 09:01 PM

Quote:

Originally Posted by hdskull

Stock nismo is 19x10.5 +23 in the back. I'm still waiting to put my 15mm spacers on!

you wont be disappointed my friend!

NISMOFO · 01-31-2011, 01:22 PM

Quote:

Originally Posted by HATED1

you wont be disappointed my friend!

If this setup clears than a 10mm would clear on mine...depending on camber I guess. I only have -1.2 in the rear....I have them as straight as possible.

This setup on the Nismos + 15mm spacer would be 9.5mm farther out than mine right now.

11-15-2010, 12:55 PM	#1 (permalink)
htt760 Base Member Join Date: May 2009 Location: Bonsall, CA (San Diego) Posts: 246 Drives: 2009 Base 370z Rep Power: 15	305 30 19 Tires and Spacer??? Hey Guys, I currently am running a 19 by 10.5 in the rear with a +12, do you think a 10mm spacer is to much for 305 30 19 tires? or is a 5mm recommended? Thanks Huy __________________ http://i39.photobucket.com/albums/e1...f/Huys3701.jpg Volks LE 37's 19x9.5 - 19x10.5 (+12 offset), Status Elite Intakes and Some fast Stickers

11-15-2010, 01:00 PM	#2 (permalink)
the_student Track Member Join Date: Jun 2009 Location: bay area Posts: 522 Drives: '13 LE 4runner Rep Power: 16	I have seen a 5 mm spacer with that setup but I forget that camber value. I don't know about 10 though, but it may work if you give yourself a little more negative camber. __________________ 2009 370Z PW 6MT Base/Sport/KW/PWJDM/HKS...RIP. 2011 370Z PW 6MT Base/Sport...KW V3/HKS/TE37 SL/Clear Bra

11-15-2010, 01:05 PM	#3 (permalink)
htt760 Base Member Join Date: May 2009 Location: Bonsall, CA (San Diego) Posts: 246 Drives: 2009 Base 370z Rep Power: 15	thanks student.. the 5mm will save me tire in the end :-) __________________ http://i39.photobucket.com/albums/e1...f/Huys3701.jpg Volks LE 37's 19x9.5 - 19x10.5 (+12 offset), Status Elite Intakes and Some fast Stickers

11-16-2010, 10:31 AM	#8 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	If you pull the fender it's gonna look like !@#$. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Oil Pan Spacer	wstar	DIY Section (Do-It-Yourself)	44	04-23-2018 07:22 AM
plenum spacer/ t.b. spacer	jnaut	Intake/Exhaust	56	08-08-2013 02:57 AM
H&R Spacer Install Help (MD)	TROOPER	Mid-Atlantic Region	52	05-23-2011 10:29 PM
help! zenclosure spacer	fuct	Audio & Video	6	07-23-2010 01:21 AM
Plenum spacer anyone???	john370z	Intake/Exhaust	13	03-27-2010 11:02 AM

11-15-2010, 01:52 PM	#4 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 23	im told on the factory nismo rear wheel with a 305/30/19 to run a 15mm spacer. not sure what my offsets are on the nismo wheel though.... jsut a heads up

11-15-2010, 02:26 PM	#5 (permalink)
HATED1 Track Member Join Date: Jan 2009 Location: WA Posts: 504 Drives: 2010-370z-Red-6 SPD Rep Power: 17	I run the setup mentioned with 19x10.5 +3 with the 2o mm spacer on 305/30/19, little bit of poke, but I like it, 15mm would be ideal.

11-15-2010, 02:38 PM	#6 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	the most i'd do is a 5mm if the wheel is already a 10.5 +12mm

11-16-2010, 11:32 AM	#9 (permalink)
HATED1 Track Member Join Date: Jan 2009 Location: WA Posts: 504 Drives: 2010-370z-Red-6 SPD Rep Power: 17	don't pull, 5mm sounds about right, abbording to your offsets

11-16-2010, 12:00 PM	#10 (permalink)
Jeffblue A True Z Fanatic Join Date: Dec 2009 Location: NY Age: 36 Posts: 9,192 Drives: Z32TT & 335xi Coupe Rep Power: 37	i have a set of 5mm and a set of 10mm HR stud extension type spacers that i bought and never used. I forgot to return them and then when i realized that i needed to, it was too late (30+days). Anyways, i am having coilovers and a camber kit installed this weekend, and i will see how the car looks when lowered, but i doubt i will end up using them, in which case you can buy them from me for cheaper than they'd cost new.

01-27-2011, 07:34 PM	#12 (permalink)
NISMOFO Enthusiast Member Join Date: Jan 2009 Location: McKinney, TX Posts: 269 Drives: 370Z Rep Power: 16	I have 19x11" rear +24 and that is about 5.5mm farther out than yours....and I have been thinking about doing a 5mm spacer myself. 5mm will be plenty fine...plenty. Im om eibachs and 305/30s Old thread...sorry. curious what you decided?

01-27-2011, 07:54 PM	#13 (permalink)
hdskull Track Member Join Date: Jun 2009 Location: San Diego Posts: 680 Drives: '10 Black 370Z 6MT Rep Power: 16	Stock nismo is 19x10.5 +23 in the back. I'm still waiting to put my 15mm spacers on!