Nissan 370Z Forum
Page 28 of 49 « First 182627 28 293038 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Brakes & Suspension (http://www.the370z.com/brakes-suspension/)
-   -   Slammed 370's Pics please!! :) (http://www.the370z.com/brakes-suspension/27042-slammed-370s-pics-please.html)

rAiN 03-03-2013 05:19 PM
Quote:
Originally Posted by Punk86 (Post 2194533)
Do you have sport package breaks? I know for my VSXXs I had to get the r-disks because the 0-disks wouldnt clear the calipers. There is a chance u will have to run a spacers.... even with the r-disk i had to rum a 5mm on the fronts.
luckily i have base

Punk86 03-04-2013 09:33 AM
Yeah, you should be good then!

kazman 03-08-2013 07:17 PM
subscribed

Xplicit97 03-08-2013 07:21 PM
1 Attachment(s)
Attachment 64662

Sent from my SPH-L710 using Tapatalk 2

KaienZ34 03-08-2013 07:25 PM
http://i1109.photobucket.com/albums/...psb69a8e2d.jpg

sfearl1 03-08-2013 08:37 PM
http://farm9.staticflickr.com/8387/8...068f754b_c.jpg

KaienZ34 03-08-2013 08:58 PM
^ Hot....more pics please

Xplicit97 03-08-2013 09:00 PM
Quote:
Originally Posted by sfearl1 (Post 2204024)
Lookin good bro!

Sent from my SPH-L710 using Tapatalk 2

sfearl1 03-10-2013 03:09 PM
Thanks man, you too! Here's another iPhone pic from last night after I lowered it another half inch up front..

http://img.tapatalk.com/d/13/03/11/a2aby7aj.jpg

rAiN 03-22-2013 01:11 AM
alright one more question,

19x12 -6. will it work or not? and with which tire size if i were to keep my camber at -3

ColdFire 03-24-2013 10:32 AM
Hey guys I would need your guidance to were should I go or to whom I should ask!

My 2013 Z has scrapped badly by going over 25cm carb! ouch and today I feel like (F#@K IT) .. About time to get scraping lol..
What your thoughts around SPC Camber kit front and back with rear toe bolt..
Planning on getting KW3 Coilover ... How ever I had no clue how conservative can I go and what camber or toe to have plus what spacer would be required to make the rims flush.
PS: My rims are 2013 stock 19 inch Rays wheel 9.5 and 10.5 back..
Any help from you fellas will be regarded here in the far east..

sfearl1 03-24-2013 10:40 AM
http://img.tapatalk.com/d/13/03/24/2ygyqezu.jpg

KaienZ34 03-24-2013 10:57 AM
Quote:
Originally Posted by ColdFire (Post 2230370)
Hey guys I would need your guidance to were should I go or to whom I should ask!

My 2013 Z has scrapped badly by going over 25cm carb! ouch and today I feel like (F#@K IT) .. About time to get scraping lol..
What your thoughts around SPC Camber kit front and back with rear toe bolt..
Planning on getting KW3 Coilover ... How ever I had no clue how conservative can I go and what camber or toe to have plus what spacer would be required to make the rims flush.
PS: My rims are 2013 stock 19 inch Rays wheel 9.5 and 10.5 back..
Any help from you fellas will be regarded here in the far east..
Stock rays are 19x9.0+47 front and 19x10.0+30 rear.

Ni55anPat 03-24-2013 01:12 PM
Quote:
Originally Posted by rAiN (Post 2226575)
alright one more question,

19x12 -6. will it work or not? and with which tire size if i were to keep my camber at -3
275 or 285 but you'll prov be -3.3 ish with camber.

Yes it will work

Willy 03-24-2013 04:17 PM
:happydance: :ughdance:


All times are GMT -5. The time now is 04:52 PM.
Page 28 of 49 « First 182627 28 293038 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2