Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Brakes & Suspension (http://www.the370z.com/brakes-suspension/)
-   -   Slammed 370's Pics please!! :) (http://www.the370z.com/brakes-suspension/27042-slammed-370s-pics-please.html)

KaienZ34 02-23-2013 02:09 PM

Quote:

Originally Posted by sfearl1 (Post 2180551)
Really though, a fender roll is a very minor modification.

Jimmy, I may have missed it.. Did you roll rears too or just fronts? I'm only doing fronts tomorrow, unless you think I should do all four corners.


I rears are pre-rolled at the factory. ;)

sfearl1 02-23-2013 02:46 PM

Now I know ha

KaienZ34 02-23-2013 02:49 PM

Quote:

Originally Posted by sfearl1 (Post 2180773)
Now I know ha


How much lower than stock are you going?

.c2 02-23-2013 03:43 PM

Quote:

Originally Posted by Good_Tymes (Post 2177696)
Can someone tell me what size drop he has (or might have) and wheels + rims. I like how the rims go inside instead of poppin out....if that makes sense. HELP:ughdance:

Rims that go in are rims with a lip, just look for wheels with a big lip and you're good to go

sfearl1 02-23-2013 05:20 PM

Quote:

Originally Posted by KaienZ34 (Post 2180777)
How much lower than stock are you going?

I'm already on swifts. I'm installing coils this week. Going another inch to 1.5" lower than I am now.

Punk86 02-23-2013 11:35 PM

yeah, I only did the fronts. The only thing you can do with the rears is pull them, but I would try to avoid going that far with it haha.

Punk86 02-23-2013 11:42 PM

Quote:

Originally Posted by Ni55anPat (Post 2180649)
My new setup will consist of:

19x9: -3 offset
19x10: -25 offset

Front: 225/40? or35?
Rear: 245/35

I hope to achieve this will about -3 camber all around.

How can you roll the rears? they're flat already?

For the fronts i would deff do a 225/40 (this is what i have on a 19x10).

For the rears you may have to go past -3 camber or run a smaller tire than that. My old setup was 10.5 -5 in the rear at -4 camber without a stretched tire and that was as close as you could get.

Do you have camber arms or just going to leave the camber where it naturally falls when you lower the car? Are you using coilovers?

Ni55anPat 02-24-2013 10:30 PM

^^
I'm on air suspension. stock arms, everything.

I was running 19x10 with -15 offset with a 265/35 and was running -3.2 camber.

KaienZ34 02-26-2013 10:12 AM

http://i1109.photobucket.com/albums/...ps1444e654.jpg

http://i1109.photobucket.com/albums/...ps04a082f1.jpg

http://i1109.photobucket.com/albums/...ps6cbe7a50.jpg

http://i1109.photobucket.com/albums/...psee0b5dd1.jpg

http://i1109.photobucket.com/albums/...ps5f7373f6.jpg

More pics here... Nissan 370Z Forum - Marcin's Album: my Z :)

Ni55anPat 02-26-2013 12:21 PM

He has a different set of wheels now. Cool guy.

Punk86 02-26-2013 01:47 PM

Yeah, hes building a custom cage for his car right now... hes a cool dude

I've been keeping an eye on his progress caus that might be my next big project :D

rAiN 03-02-2013 12:01 PM

so i am ordering

19x10 +11
19x11 +11

both o-disk type from work wheels.
what tires can i run with these without having to shave off my fender well

sfearl1 03-02-2013 01:28 PM

The Nessen 370z..

https://sphotos-a.xx.fbcdn.net/hphot...79106905_n.jpg

Ni55anPat 03-02-2013 02:45 PM

i love Nessen, big bucks though.

Punk86 03-03-2013 04:14 PM

Quote:

Originally Posted by rAiN (Post 2192920)
so i am ordering

19x10 +11
19x11 +11

both o-disk type from work wheels.
what tires can i run with these without having to shave off my fender well

Do you have sport package breaks? I know for my VSXXs I had to get the r-disks because the 0-disks wouldnt clear the calipers. There is a chance u will have to run a spacers.... even with the r-disk i had to rum a 5mm on the fronts.


All times are GMT -5. The time now is 10:51 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2