Titanium Nitride brake caliper coating

Scott @ RA · 03-30-2010, 04:31 AM

Quote:

Originally Posted by 1slow370

unfortunately there is a problem with this. As a machinist I am EXTREMELY familiar with TiN coatings and for your sake stop thinking of it as a coating. It is applied as a heat treatment to steel and cobalt(the main binding material for carbide tools) and requires heating the part to extremely high temperatures. FYI steel parts are coated at temperatures just below the transformation temperature of steel which is usually right around 1200 degrees F.

Edit: also it is an excellent thermal barrier so all the heat from your brakes would be trapped in your calipers so don't do it

^^ Great post and very well put. I am a former class A master machinist with a aerospace background, couldn't have said it better my self. Not possible and will not be an option for any T6 6064, 6061, or even any 7-series aluminum calipers out there.

AP - Chris_B · 03-31-2010, 12:45 PM

Quote:

Originally Posted by Scott @ RA

^^ Great post and very well put. I am a former class A master machinist with a aerospace background, couldn't have said it better my self. Not possible and will not be an option for any T6 6064, 6061, or even any 7-series aluminum calipers out there.

Agreed! And let's hope there aren't any 7000-series calipers out there -- well, at least not on my car!

Chris

SkyZ · 03-31-2010, 09:34 PM

ah thanks for the heads up. just some crazy idea i had looking at drill bits. cause i know they would be able to TAKE the heat. just didnt think of the trapping heat part or the whats it called specific heat something of aluminum? anyways bear with my off the wall thinking i guess =]. always good to learn more.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Group buy, Sport Caliper Powdercoating	Mike	Group Buys	257	06-30-2015 06:36 PM
EOI: Titanium Brake Shims for OEM Akebono (Sport) Brakes	Aust350z	Brakes & Suspension	13	02-09-2012 01:43 AM
Brake Caliper Switcharoo	spearfish25	Brakes & Suspension	4	03-17-2010 08:52 PM
HELP 370z rear 2 piston caliper &rotor	drifter s14	Brakes & Suspension	0	03-08-2010 07:58 PM
Powder coating in Northern VA	m4a1mustang	Mid-Atlantic Region	17	12-26-2009 09:29 PM

03-31-2010, 09:34 PM	#3 (permalink)
SkyZ Enthusiast Member Join Date: Jul 2009 Location: Canada Posts: 382 Drives: 09 370z PG M6 Rep Power: 18	ah thanks for the heads up. just some crazy idea i had looking at drill bits. cause i know they would be able to TAKE the heat. just didnt think of the trapping heat part or the whats it called specific heat something of aluminum? anyways bear with my off the wall thinking i guess =]. always good to learn more.