Sway bars, camber arms, etc
 

Hello there everyone,

I am looking to buy some suspension parts, but I am not sure what I should get...

Currently on lowering springs (Megan Racing), and there were people saying that sway bars are the must have item.

So I will definitely get sway bars and thinking of getting Hotchkis ones.

is there anything else I should get that you guys recommend? such as, coils, camber arms, end links, bushings etc.

I don't know much about suspension parts so hope someone can help me decide.

It is my daily and I go to canyons quite often and track a few times in a year.

I suggest you search and read the track forum, including a thread such as this:

http://www.the370z.com/track-autocro...ack-setup.html

As well as this thread, since wheel and suspension go together:
http://www.the370z.com/wheels-tires/...tart-here.html

In general though:
You'll want an entry level coilover but not one of the crappy ebay level brands. Throw your springs away. Look at Fortune's 500 series, Powertrix (Z specialist), or BC racing

We have no front camber/caster adjustment and limited camber/caster adjustment in rear. The best and only solution is SPL parts: https://www.splparts.com/09-370z-z34/
You will need their front upper control arms, rear camber arm, rear traction arm, and either the toe arm or midlink depending on your type of coilover. True type (spring around the damper) requires the toe arm; OEM type (spring divorced from damper) requires the midlink. Used versions of these parts pop up in the FS section, keep an eye out.

SPL stuff has the best adjustment range and a secure locking mechanism that is also the easiest to adjust for your tech. They will love you. They are track proven and also give you the adjustment for an essentially infinite range of wheel fitment

The final component of this area is the wheels. For track, generally proven setup is 18x10.5 or 18x11 in the +12 to +20 range (or thereabouts) with 275 or 285 tires. For beginner, something like a 200TW is probably a good starting point

Sport brakes (akebono calipers) can hold up on track with better fluids, new pads, and calipers, but cooling can be an issue. brake ducting, titanium shims, 2 pc rotors all help. At higher skill levels, better hardware may be required, but thats down the line

On the practical side, you have to have a helmet to track, thats non negotiable. You should test before buying anything, and make sure it is certified. You should also test IN CAR to make sure you fit with the helmet. If you cannot fit, move to next step:

Seats. 2015+ Nismos have recaros that hold fine, but if you dont have such a model you will need to look at an aftermarket bucket. Again, test before buying. Do not buy a seat you have not sat in. Depending on your height, custom work may be required. I'm just under 6 ft but have a long torso so i have clearance issues

:iagree:

On the helmet thing. New standards came out. Snell 2020. The new helmets with the new standards won't be out until Oct. Most tracks will let you use a helmet that is a 2015 Snell standard for now.

Oh, and a diff will make a big difference as well but it may be a more involved process.

just ordered BC coils and Hotchkis Sways :D

Since you got the coil-overs. You'll need an alignment. So you might as well get the SPL parts too. So that you only have to the alignment once.

SPL parts. Save thousands on never having an alignment again.

Sent from my SM-G955U using Tapatalk