Nissan 370Z Forum - Z1 Master cylinder brace installed.

Page 4 of 4

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Brakes & Suspension (http://www.the370z.com/brakes-suspension/)

- - Z1 Master cylinder brace installed. (http://www.the370z.com/brakes-suspension/114376-z1-master-cylinder-brace-installed.html)

nasm	04-12-2021 04:54 AM

Quote:

Originally Posted by Mike (Post 3492796)

Just put this on friday at the track between sessions. Gives a noticeably firmer pedal. Not a huge change, but noticeable. Highly recommend it.

https://www.z1motorsports.com/brakes...ce-p-9538.html

https://www.z1motorsports.com/imageG...inderBrace.jpg

I totally agree with you, I just installed mine couple of days ago, and I have noticed the pedal is firmer now. And as you mentioned, not that huge change, but it is worth it I guess.

Update: I just got 2 screws installed on both ends (fist and last), the second one (middle) didn't go in, and I think it is problem is on the car not the brace. However it is secured and solid enough to do the purpose.

Regards,
NASM

obender66

04-13-2021 04:12 PM

Quote:

Originally Posted by nasm (Post 3991677)

Same here-middle screw didn't go in. For those who are reading and planning to install-file the hole down about 1mm extra, should be OK

SOUTHZZ

04-14-2021 03:23 AM

Good idea this master cylinder brace.

I have a similar brace on my Z33. Carbing made a strut brace with a master cylinder
brace attached. Not a huge change in the braking feel. But is noticeable.
Did Z1 get the idea from the Carbing product?

All times are GMT -5. The time now is 09:56 AM.

Page 4 of 4

« First

Show 40 post(s) from this thread on one page