Originally Posted by carlitos_370z (Post 2943214)

damn want to see it installed :yum:

Originally Posted by pfdaxe (Post 2946690)

I received mine for my Amuse, and I have to say, fitment is a bit off. At least for my Shine Auto Amuse. It's a bit too wide and too long. I'll have to trim it in the back so my tires don't rub it. Not too happy :shakes head:

Originally Posted by Fly1 Motorsports (Post 2917082)

1-Day Sale (ends Sunday @ 11AM PST)! Matte black custom skid plate/splitter w/ edge trim for $199 shipped! PM us to place an order :tup:

http://i1019.photobucket.com/albums/...pse6gwjc3d.jpg

Originally Posted by DEpointfive0 (Post 2946698)

Maybe it's supposed to stick out like this?

Originally Posted by pfdaxe (Post 2946702)

When I had it flush in the fender well, it was very uneven in front. I just measured it, and it's an inch longer on one side (towards the tire). I think it was poor quality control. It looks like the aluminum was hand cut because the cuts are not very straight.

Originally Posted by pfdaxe (Post 2946690)

I received mine for my Amuse, and I have to say, fitment is a bit off. At least for my Shine Auto Amuse. It's a bit too wide and too long. I'll have to trim it in the back so my tires don't rub it. Not too happy :shakes head:

Originally Posted by DEpointfive0 (Post 2946698)

Maybe it's supposed to stick out like this?

Originally Posted by pfdaxe (Post 2946702)

When I had it flush in the fender well, it was very uneven in front. I just measured it, and it's an inch longer on one side (towards the tire). I think it was poor quality control. It looks like the aluminum was hand cut because the cuts are not very straight.

Originally Posted by pfdaxe (Post 2946708)

The more I look at it and try to line it up, the more I think I maybe wasting my time. At this point, I'll either hack in to it to try and make it fit, or return it.

Originally Posted by Fly1 Motorsports (Post 2946823)

Sorry you are having fitment issues. Yes, all our skid plates / splitters are hand fabricated to allow for customization to any lip/bumper at an affordable price point. Specifically with the Amuse splitters - we cut them long as the vast majority have mounted them sticking out.

That said, if yours is uneven; we will make it right. I will respond to you via PM :tiphat:

Originally Posted by pfdaxe (Post 2946831)

Thank you. I'll loosely mount it and do some trimming. I really like the idea, material and service from you. I was just hoping for a quick install without modification. Had I known about being cut long etc., I wouldn't have been so frustrated and scratching my head...



Thank you for your reply and concern



:tiphat:

Originally Posted by pfdaxe (Post 2949179)

After a bout 2 hours, I was able make this work. Attached are some pics. I'm not sure what happened during production, but when squared, in the first pic you can see what I had to work with. It was cut wrong and took some time and trimming here and there to make fit correctly. The other 2 pics show the finished product. It's attached with 3M tape and about a dozen self-tapping screws. I don't think it's going anywhere. This is my review:



Product/Idea: 10

Quality of Material: 10

Customer Service: 10++

Finished Product: 10

Expecting Plug & Play (need better template): 5



I really like the finished product and the exceptional customer service, before, during and after the sale. They really went out of their way to insure I was happy. My only gripe, was that I was expecting something more plug & play where I could just mount with 3M & some self-tapping screws and call it a day. I took a bit more than that. In the end, I'm pleased with this product and DO recommend...







:tiphat:

Originally Posted by Fly1 Motorsports (Post 2949342)

Thanks for the honest review Paul. As with any new product/service there is always room for improvement - and I appreciate you pointing out how we can do better. As a small company, the buck stops with me and the good thing is that I can make changes that take effect ASAP.

These skid plates/splitters have a pretty personal element in terms of the desired function/look and how they are mounted. We will be more diligent in evaluating this from customers before fabricating the pieces going forward, as well as monitoring quality of the cuts.

Cheers :tiphat:

Originally Posted by kornflake7 (Post 2952137)

Oh man let me know when a 2013 nismo is available would love to have one especially when I go lower

Originally Posted by Fly1 Motorsports (Post 2952856)

All you have to do is send me a trace of your front bumper (on cardboard) and I can fabricate exactly how you want it :tup:

PM me for more details!!

Originally Posted by juicinjake (Post 2957241)

could you make something like this that would work with the carbon signal lip for the 13-14 nismo bumper?

Originally Posted by Fly1 Motorsports (Post 2846341)

Custom splitter wrapped in 4D carbon fiber vinyl and front edge finished with rubber trim :tup:

PM us for your custom skid plate or splitter!!

http://i1019.photobucket.com/albums/...ps262a77ac.jpg

http://i1019.photobucket.com/albums/...ps5af449b7.jpg

http://i1019.photobucket.com/albums/...ps8de2212d.jpg

Originally Posted by cgomez77 (Post 2989842)

ZELE LIP skid plate SHIP TO 91731

Originally Posted by Fly1 Motorsports (Post 3018917)

:tup:

http://i1019.photobucket.com/albums/...pslwvxtg92.jpg

Originally Posted by cooltoy (Post 3029210)

I was just curious, for scrape protection would a sheet of stainless steel be better? I know it will be heavier, but would it be more durable?

Originally Posted by cooltoy (Post 3029590)

What do you mean by "work similarly"?

I understand that both will protect, but will I be changing out the aluminum on sooner then SS one?