Nissan 370Z Forum
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Body Interior/Exterior (http://www.the370z.com/body-interior-exterior/)
-   -   ZSpeed NISMO 370Z Front Diffuser Splash Shield (http://www.the370z.com/body-interior-exterior/52336-zspeed-nismo-370z-front-diffuser-splash-shield.html)

Joe@ZSpeed 03-31-2012 10:19 PM
ZSpeed NISMO 370Z Front Diffuser Splash Shield
 
ZSpeed Nismo 370Z Aluminum Under Engine Diffuser

The ZSpeed diffuser replaces the very costly ($1400.00+) plastic engine splash shield the Nismo version 370z comes with from the factory.

ZSpeed Performance Nismo 370Z Engine Splash Shield For 09-14 370Z

This piece is very important to have on the car for correct air flow under the car.

We have included an oil change access panel for quick and painless oil changes so there is no need to remove the entire splash shield just to change the oil and filter.

Plenty of room for bigger sway bars, Deeper aftermarket oil pans and oil pan spacers.

  • Provides better air flow under car
  • Oil change access door
  • Coolant drain access hole
  • Precision made of .063" aluminum
  • Vented in front recess to pull cool air in and across oil pan and then out the back of the shield for better cooling



http://www.zspeedperformance.com/ima...20370Z%204.jpg
http://www.zspeedperformance.com/images/100_1172.jpg
http://www.zspeedperformance.com/images/177_0129.jpg

whoLEEoh 04-01-2012 12:13 PM
First...awesome!!!!! I gotta wait til my next pay check tho :/

wind.zero 04-07-2012 08:15 PM
I installed mine today. This is a very quality piece of kit.

kensnismo 04-24-2012 11:16 AM
diffuser
 
let us know when black nismo model back in stock

Zat_Zuma 04-25-2012 08:44 AM
Is it possible to custom build them in regards to the location of the oil change access panel for those with a oil filter relocation kit?

JJ-NISMO 06-12-2012 10:35 PM
PM price for silver and also the PC.

Do you have forum member pricing? What is cost to ship to 92807?

Thanks!

new370 06-12-2012 11:14 PM
Can you pm me prices on both shipped to 19114

Joe@ZSpeed 06-12-2012 11:27 PM
Quote:
Originally Posted by Zat_Zuma (Post 1684510)
Is it possible to custom build them in regards to the location of the oil change access panel for those with a oil filter relocation kit?
Sorry, Must have missed this post. I'm sure it could be done. Where did you relocate the filter to?

Bryan 07-02-2012 08:06 PM
Are these in stock?

IllusTwo3 07-10-2012 06:58 AM
Will this fit with an oil cooler installed?

gurneyeagle 07-17-2012 08:34 PM
Quote:
Originally Posted by Joe@ZSpeed (Post 1803199)
Should have more any day now. Will update here when we get them finished up.
Looks like I'm going to want one too Joe. Please keep us posted on availability.

Joe@ZSpeed 07-18-2012 07:31 AM
They are back in stock now.

Joe@ZSpeed 07-18-2012 07:34 AM
Quote:
Originally Posted by IllusTwo3 (Post 1814074)
Will this fit with an oil cooler installed?
It should not affect it, would depend on where it is installed.

Joe@ZSpeed 09-05-2012 03:15 PM
Bump!

stevent85 10-25-2012 09:17 AM
Got the powder coated one back in stock?

Sent from my DROID4

Joe@ZSpeed 10-25-2012 09:33 AM
Quote:
Originally Posted by stevent85 (Post 1979947)
Got the powder coated one back in stock?

Sent from my DROID4
Yes, 3 In stock.

Joe@ZSpeed 11-15-2012 10:47 AM
Bump!

Joe@ZSpeed 11-20-2012 04:20 PM
Bump!

djtodd 12-18-2012 09:00 PM
These are awesome btw. Installed mine about a month ago. Top quality.

370ZNISMO#704 12-24-2012 04:22 PM
Price for a black one shipped to 98092 thanks.

okczguy 12-26-2012 10:45 AM
Price for a black one shipped to 73013 thanks.

tu_clean 01-16-2013 09:13 PM
Black shipped to 94551 please. Also I'm assuming that this piece is thinner than the stock plastic piece correct? If it is that would be great as it will give extra ground clearance for us fellas that like to roll super low.

Joe@ZSpeed 01-17-2013 09:46 AM
PM's sent!

Volk Z 01-29-2013 10:20 AM
These guys are awesome! i had one for my 350Z and fitment and customer service was brilliant!

I will be ordering one for my NISMO in a couple weeks...

This is a GREAT investment everyone!

Volk Z 04-10-2013 08:34 PM
Can I get a price shipped on this part?

I had one for my 350z and it was awesome

Xplicit97 06-21-2013 12:11 PM
Orice shipped for Nismo version 98310 please.

Sent from my SPH-L710 using Tapatalk 2

the_Z_kid 08-13-2013 04:06 PM
how much for black nismo version shipped to 66219

Joe@ZSpeed 08-13-2013 04:13 PM
Quote:
Originally Posted by the_Z_kid (Post 2444523)
how much for black nismo version shipped to 66219
$399 but they are out of stock for 4-5 weeks.

MiStR.NGuYeN 09-15-2013 11:47 PM
please let me know when they are in stock. doing a front end nismo conversion soon!
and can i get a price shipped to 39367

Joe@ZSpeed 09-16-2013 12:36 PM
More should be ready in about 2 weeks.

Joe@ZSpeed 10-17-2013 01:28 PM
Powder Coated Black Nismo Diffusers, BACK IN STOCK!

Joe@ZSpeed 10-29-2013 01:52 PM
Bump! Ready to ship!

mwhit02 10-30-2013 04:23 PM
price shipped to 33559 please!

Joe@ZSpeed 11-15-2013 11:58 AM
Bump! 9 In Stock!

Infamous 01-22-2014 12:53 PM
Price of each shipped to 89178 please.

Joe@ZSpeed 01-22-2014 01:27 PM
Quote:
Originally Posted by Infamous (Post 2662300)
Price of each shipped to 89178 please.
They are only available in PC Black now, They are $399 shipped

Only a few left in stock until we get more made.

phantom370z 03-13-2014 07:56 AM
Just got mine in yesterday and will be installing this on the weekend...everything looks great Joe, thanks!

phantom370z 03-17-2014 07:29 PM
Installed today and everything fit perfectly. Awesome piece Joe!

Imperial 09-12-2014 04:10 PM
What happens to the long rectangular plastic piece that attaches to the OEM splash guard with this product?

Joe@ZSpeed 09-12-2014 04:23 PM
Quote:
Originally Posted by Imperial (Post 2963293)
What happens to the long rectangular plastic piece that attaches to the OEM splash guard with this product?
You don't use it, We have a vent built in the opening to help get more hot air out of the engine compartment and help cool the pan area as much as possible.


All times are GMT -5. The time now is 06:22 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2