http://www.sunlineracingusa.com/imag...e_logo_150.jpg
SpeedElement is proud to announce that we are now an official distributor for Sunline Racing products in the USA.
Sunline Racing, Japan is a highly respected and well known within the Performance and Racing Industry. Their extensive participation in the Time Attack Series throughout Japan has been highly documented throughout the world. Sunline Racing has been focused and actively developing High Performance After-Market parts for select Nissan & Suzuki vehicles.
Their new lineup for the Z34/Fairlady Z chassis includes some very appealing carbon exterior products. Often imitated, these are the true originals- never settle for anything less.
370Z Front Half/Lip Spoiler
● Available in “Mat Carbon”, “Carbon” and “FRP”
http://www.sunlineracingusa.com/imag...nt_spo_300.jpg
370Z Side Step
● Available in “Mat Carbon”, “Carbon” and “FRP”
http://www.sunlineracingusa.com/imag...destep_300.jpg
370Z Rear Under Fin
● Available in “Mat Carbon”, “Carbon” and “FRP”
http://www.sunlineracingusa.com/imag...ar-fin_300.jpg
370Z Carbon Full Roof
● Made of dry carbon for luxurious appearance. Same material and production method used for Dry Carbon Roof Cover for Nissan GTR
● Manufactured by an autoclave under vacuum high pressure
● Very strong and excellent quality at 0.8mm thickness
● The super hard clear coating promises a much better protection from the ultraviolet rays and a long product life
Note: The picture is shown with 350Z
http://www.sunlineracingusa.com/imag...Rcover_300.jpg
370Z Carbon Roof Cover
● This Carbon Roof Cover produces an exquisite appearance for your 370Z
● Attached to the roof by special double sided tape
● Adhesion tested to 160 miles/h
● Available in “Mat Carbon” or “Carbon”
http://www.sunlineracingusa.com/imag...fcover_300.jpg
370Z 3D GT Wing Type-Z
● Our 3D (3 dimensions) design generates significant down force without increasing much aerodynamic drag
● Three widths are offered ; 1,400mm, 1,500mm, or 1,600mm. The pictures are taken with the 1,600mm wing.
● Several height choices are offered from 195mm to 275mm. (195mm, 225mm, 245mm, and 275mm). The picture is taken with the 245mm height bracket on 350Z.
● Available in wet carbon or dry carbon
http://www.sunlineracingusa.com/imag...GTwing_300.jpg
370Z 3D GT Wing Type-ZC
● With its low mounting bracket, the type ZC wing generate a conservative look
● The width of the wing is 1,470mm and is made of wet carbon.
● It originally designed to conform to the regulation of a 350Z racing series. The picture is taken with 350Z.
http://www.sunlineracingusa.com/imag...ing_ZC_300.jpg
$$PM ME FOR PRICING$$
