LOC for aftermarket sub

RonRizz

For $100 I would suggest to you the Audio control LC2i converter.
You can use this converter with low level (prior to amp) OR high level (after amp) inputs, but not both at the same time.
Yes, once you have it set up properly, your volume control will work as it should.
Amp remote can come from any switched 12volt source, try your powered antenna lead. You will not need one for the LC2i, it has a signal sensing turn-on feature, so all you need is 12v from battery for it, which you could tap off your main power from battery to amp.
Perhaps including the information that you tried the search prior to your post would have gotten better results the first time around. I was not trying to come off like a dic%head. (unlike you in your reply).
Hope this helps

__________________
P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals