Just want more bass for Bose

pfdaxe

Hey guys: I'm back with more questions. I'm thinking about replacing my fronts with a set of 6.5 components (the roll-off of the highs starting to bug me a bit) . I know all about re-wiring which isn't really a big deal.

My question is more about the amp connection.

Do the front speaker output wires from the Bose amp send a full range signal? Right now I have the sub out wires from the Bose amp connected to the speaker input on the LC2i to send the base signal to the sub amp, but I cannot connect the front wires AND the sub wires to the LOC at the same time. So I was wondering if the fronts would provide enough signal for the amps that are for the sub and the second amp for the fronts? I spoke with Eric at AC and he said he wasn't sure if our vehicles had the full frequency or I'd have to install a second LC2i just for the main amp.

I guess I'm just looking for the easiest way to connect a second amp...

This is what I'm looking at:

Polk Audio DB6501 6.5-Inch 2-Way Component:

http://www.polkaudio.com/products/db6501

Rockford Fosgate PRIME R150X2:

http://www.rockfordfosgate.com/produ...?itemid=225201

Or perhaps:

Rockford Fosgate Punch P300X2

http://www.rockfordfosgate.com/produ...?itemid=120386

Rockford Fosgate Punch P400-2

http://www.rockfordfosgate.com/produ...?itemid=108228

Thoughts?

Boy...I'm starting to confuse myself...

__________________
Build Thread: http://www.the370z.com/members-370z-...xes-build.html