FREE! GTMat Automotive Sound Deadener - LIMITED TIME

GTMat · 10-12-2012, 03:53 PM

Quote:

Originally Posted by NickD

Are you guys doing liqui-damp samples too? Is it too late for sheet samples?

We have not opened up the liquid to free samples just yet. Give us a call tomorrow morning to get your free mat sample!

GTMat · 10-18-2012, 05:26 PM

We could always use more likes on our Facebook page! You can also share your reviews and installs here. https://www.facebook.com/GtSoundControl

GTMat · 10-22-2012, 04:17 PM

Quick question for you guys: Do you prefer the mat product shipped in roll form or precut into sheets?

afbunn · 10-22-2012, 04:55 PM

Roll form. It allows the customer to cut it how they want it, whatever size they want it.

silver streak · 10-22-2012, 06:27 PM

I am very interested and will be calling tomorrow to get my sample. Can anyone tell me what amount is needed to complete the trunk and rear fender area's?? Thanks for a great offering will be sure to post pics. and review.

SouthArk370Z · 10-22-2012, 07:07 PM

Quote:

Originally Posted by silver streak

I am very interested and will be calling tomorrow to get my sample. Can anyone tell me what amount is needed to complete the trunk and rear fender area's?? Thanks for a great offering will be sure to post pics. and review.

The sample I got (10 sq ft, IIRC) covered approx. 1/3 (maybe a little bit more) of the area from the front of the towers back on my '09 Touring w/Bose. If you think you may run out of material, I'd save the area under the spare for last - it has the spare and the subwoofer on top of it, which should do some damping.

Don't expect dead quiet, even with full coverage, but the sample does do a good job of reducing the noise level.

silver streak · 10-22-2012, 07:18 PM

Thanks for the info i have an '09 base and would like to try and eliminate as much noise as possible i install my new hu and speakers while everything is taken apart. This helps me judge how much extra material will be needed to complete the job.

GTMat · 10-23-2012, 10:21 AM

Quote:

Originally Posted by SouthArk370Z

The sample I got (10 sq ft, IIRC) covered approx. 1/3 (maybe a little bit more) of the area from the front of the towers back on my '09 Touring w/Bose. If you think you may run out of material, I'd save the area under the spare for last - it has the spare and the subwoofer on top of it, which should do some damping.

Don't expect dead quiet, even with full coverage, but the sample does do a good job of reducing the noise level.

Give us a call for your sample, silver streak (The forum member, this is not the name of a liquid product).

Ole Rusty · 10-23-2012, 05:12 PM

Tracie, sounds great. I'll be calling tomorrow for a sample if it's still going on. Quick question, I'm doing a full install on a roadster as I've already got my carpet and seats pulled out. Which provides the best quality of sound deadening-paint or roll?

GTMat · 10-24-2012, 11:13 AM

Quote:

Originally Posted by Ole Rusty

Tracie, sounds great. I'll be calling tomorrow for a sample if it's still going on. Quick question, I'm doing a full install on a roadster as I've already got my carpet and seats pulled out. Which provides the best quality of sound deadening-paint or roll?

I believe it all comes down to how clean you want the install to be. The liquid product can be more of hassle but you can add as many layers as you want. Each layer for the Liqui-Damp is rated at a nominal 32mil layer. Essentially, 3 layers would put you above our thickest mat product. If you are comfortable with the drying time between layers and wish to go higher than 80mil, I would suggest the liquid.

The mat product will be a cleaner install but may not reach the corners/crevices of some spaces easily. It is also limited to the 80mil thickness at this time. You can also layer this as well, though.

At the risk of sounding too much like a salesperson, I would suggest utilizing both. The liquid can be applied on top of the mat for better coverage.

Please let me know if you have any other questions about either product.

Realale · 10-24-2012, 11:28 AM

Just ordered. Revew to follow.

GTMat · 10-24-2012, 01:13 PM

Quote:

Originally Posted by Realale

Just ordered. Revew to follow.

Ole Rusty · 10-24-2012, 03:36 PM

Just ordered. Will review soon. Looking forward to it and considering some of the paint too. I'd be willing to test a free sample of that as well, if you'd like

GTMat · 10-24-2012, 04:18 PM

Quote:

Originally Posted by Ole Rusty

Just ordered. Will review soon. Looking forward to it and considering some of the paint too. I'd be willing to test a free sample of that as well, if you'd like

Unfortunately we were only offering one sample per forum and NickD had expressed interest in it. We have not heard from him though.

Ole Rusty · 10-24-2012, 04:39 PM

No issues, just know that I'm here and always willing to try free stuff.)

10-18-2012, 05:26 PM	#62 (permalink)
GTMat Enthusiast Member Join Date: Aug 2012 Location: Austin, TX Posts: 252 Drives: R8 / Z34 Rep Power: 12	We could always use more likes on our Facebook page! You can also share your reviews and installs here. https://www.facebook.com/GtSoundControl __________________ Tracie@GTSound \| 1-855-GTSOUND \| BUY GTMAT HERE!

10-22-2012, 04:17 PM	#63 (permalink)
GTMat Enthusiast Member Join Date: Aug 2012 Location: Austin, TX Posts: 252 Drives: R8 / Z34 Rep Power: 12	Quick question for you guys: Do you prefer the mat product shipped in roll form or precut into sheets? __________________ Tracie@GTSound \| 1-855-GTSOUND \| BUY GTMAT HERE!

10-22-2012, 06:27 PM	#65 (permalink)
silver streak Base Member Join Date: Aug 2011 Location: Sterling, Va./ Va.Beach Age: 59 Posts: 27 Drives: '09 370Z coupe Rep Power: 13	I am very interested and will be calling tomorrow to get my sample. Can anyone tell me what amount is needed to complete the trunk and rear fender area's?? Thanks for a great offering will be sure to post pics. and review. __________________ [B][B]Rich Garrett

10-22-2012, 07:18 PM	#67 (permalink)
silver streak Base Member Join Date: Aug 2011 Location: Sterling, Va./ Va.Beach Age: 59 Posts: 27 Drives: '09 370Z coupe Rep Power: 13	Thanks for the info i have an '09 base and would like to try and eliminate as much noise as possible i install my new hu and speakers while everything is taken apart. This helps me judge how much extra material will be needed to complete the job. __________________ [B][B]Rich Garrett

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FREE! GTMat Automotive Sound Deadener	GTMat	Exterior & Interior	209	03-24-2013 10:00 PM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Forced Induction	2	07-17-2010 05:57 AM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Drivetrain/Engine	0	07-16-2010 07:26 PM

10-22-2012, 04:55 PM	#64 (permalink)
afbunn Base Member Join Date: Aug 2012 Location: North Ogden, Utah Posts: 116 Drives: 2009 370Z Sport M6 Rep Power: 12	Roll form. It allows the customer to cut it how they want it, whatever size they want it.

10-23-2012, 05:12 PM	#69 (permalink)
Ole Rusty Base Member Join Date: May 2010 Location: Tennessee Posts: 120 Drives: 70 'Velle/'10 ZR Rep Power: 14	Tracie, sounds great. I'll be calling tomorrow for a sample if it's still going on. Quick question, I'm doing a full install on a roadster as I've already got my carpet and seats pulled out. Which provides the best quality of sound deadening-paint or roll?

10-24-2012, 11:28 AM	#71 (permalink)
Realale Track Member Join Date: Apr 2012 Location: West Covina, CA Posts: 515 Drives: 2012 PW 370Z Nismo Rep Power: 14	Just ordered. Revew to follow.

10-24-2012, 03:36 PM	#73 (permalink)
Ole Rusty Base Member Join Date: May 2010 Location: Tennessee Posts: 120 Drives: 70 'Velle/'10 ZR Rep Power: 14	Just ordered. Will review soon. Looking forward to it and considering some of the paint too. I'd be willing to test a free sample of that as well, if you'd like

10-24-2012, 04:39 PM	#75 (permalink)
Ole Rusty Base Member Join Date: May 2010 Location: Tennessee Posts: 120 Drives: 70 'Velle/'10 ZR Rep Power: 14	No issues, just know that I'm here and always willing to try free stuff.)