FREE! GTMat Automotive Sound Deadener - LIMITED TIME

GTMat · 09-10-2012, 11:43 AM

Yes it is! Call us to get your sample.

Anyone have any new reviews or install pics?

Red_Z · 09-10-2012, 05:30 PM

installing mine this week. Will posts pic and review

AlphaSnacks · 09-10-2012, 06:50 PM

Will call tomorrow!

GTMat · 09-11-2012, 11:39 AM

Quote:

Originally Posted by Red_Z

installing mine this week. Will posts pic and review

Quote:

Originally Posted by AlphaSnacks

Will call tomorrow!

Thanks guys!

AlphaSnacks · 09-11-2012, 01:34 PM

Made my call. Sample on the way.

Thanks, guys!

AlphaSnacks · 09-16-2012, 10:30 AM

Got mine.

I'll be installing it in the coming week or two.

Naenyn · 09-16-2012, 04:33 PM

If this is still available when my Z gets here, I may give it a shot! =]

afbunn · 09-16-2012, 05:19 PM

Is this still available? If so, I'll call today.

Red_Z · 09-16-2012, 11:17 PM

Just finished install today. I never used any sound deadening product before so I can't compare to other brands. Installation was easy. The GTMat is flexible and easy to apply. The whole trunk took me about 2-3 hours. I don't have the plastic trims install back yet since I have other wiring to do, but by driving around for 15 mins, I can tell the road noise did decrease and the exhaust note sound more clear (not sure do u know what I mean). I will definitely recommend to my friends and may purchase more to finish the door.

Not the most professional install. I just cut the mat into small pieces to apply on those hard to measure/cut area. Since it will be covered anyway, so I didn't try to make it pretty.

GTMat · 09-17-2012, 02:35 PM

Quote:

Originally Posted by afbunn

Is this still available? If so, I'll call today.

Yes, we are still offering the sample! Give us a call today: 1-855-GT-SOUND

Quote:

Originally Posted by Red_Z

Just finished install today. I never used any sound deadening product before so I can't compare to other brands. Installation was easy. The GTMat is flexible and easy to apply. The whole trunk took me about 2-3 hours. I don't have the plastic trims install back yet since I have other wiring to do, but by driving around for 15 mins, I can tell the road noise did decrease and the exhaust note sound more clear (not sure do u know what I mean). I will definitely recommend to my friends and may purchase more to finish the door.

Not the most professional install. I just cut the mat into small pieces to apply on those hard to measure/cut area. Since it will be covered anyway, so I didn't try to make it pretty.

Thanks Red_Z! Once you decide to purchase, let me know and I'll arrange a discount.

Once again, we are asking that all reviews be shared on our Amazon listings so that we can build the brand name: Amazon.com: gtmat

If you know anyone who might be interested, please direct them to us! If you want to rock the GTMat shirt (who doesn't?), you can now purchase them here: GTMat Black T-Shirt Short Sleeve 100% Cotton GT Sound Control | eBay

GTMat · 10-11-2012, 09:33 AM

GTMat · 10-12-2012, 03:08 PM

New product is finally ready to go!

Amazon.com: 1 Gallon GT Liqui-Damp Automotive Sound Dampener Kit - Sound Deadening Installation Kit Includes: 1 GAL GT Liqui-Damp, Instruction Sheet, Application Brush, Tape Measure, GT MAT Decals, and Disposable Gloves: Electronics

Naenyn · 10-12-2012, 03:18 PM

How do your products handle high heat scenarios? I live in Phoenix where the summers get rather toasty. I've read about other products falling apart, separating, becoming unglued, etc.

GTMat · 10-12-2012, 03:31 PM

Quote:

Originally Posted by Naenyn

How do your products handle high heat scenarios? I live in Phoenix where the summers get rather toasty. I've read about other products falling apart, separating, becoming unglued, etc.

Our heat oven test video is perfect for addressing this. The short answer would be that our GTMat product can withstand temps up to 350 degrees which is higher than the leading discount product. We have shipped many samples to your neck of the woods and all customers have pleased. We have not heard of any issues whatsoever. Our heat video is below.

NickD · 10-12-2012, 03:40 PM

Are you guys doing liqui-damp samples too? Is it too late for sheet samples?

09-10-2012, 11:43 AM	#46 (permalink)
GTMat Enthusiast Member Join Date: Aug 2012 Location: Austin, TX Posts: 252 Drives: R8 / Z34 Rep Power: 14	Yes it is! Call us to get your sample. Anyone have any new reviews or install pics? __________________ Tracie@GTSound \| 1-855-GTSOUND \| BUY GTMAT HERE!

10-11-2012, 09:33 AM	#56 (permalink)
GTMat Enthusiast Member Join Date: Aug 2012 Location: Austin, TX Posts: 252 Drives: R8 / Z34 Rep Power: 14	__________________ Tracie@GTSound \| 1-855-GTSOUND \| BUY GTMAT HERE!

10-12-2012, 03:08 PM	#57 (permalink)
GTMat Enthusiast Member Join Date: Aug 2012 Location: Austin, TX Posts: 252 Drives: R8 / Z34 Rep Power: 14	New product is finally ready to go! Amazon.com: 1 Gallon GT Liqui-Damp Automotive Sound Dampener Kit - Sound Deadening Installation Kit Includes: 1 GAL GT Liqui-Damp, Instruction Sheet, Application Brush, Tape Measure, GT MAT Decals, and Disposable Gloves: Electronics __________________ Tracie@GTSound \| 1-855-GTSOUND \| BUY GTMAT HERE!

10-12-2012, 03:40 PM	#60 (permalink)
NickD A True Z Fanatic Join Date: Mar 2012 Location: Babylon, NY Posts: 1,321 Drives: 10 Z34 Touring Vert Rep Power: 16	Are you guys doing liqui-damp samples too? Is it too late for sheet samples? __________________ 2010 370z Touring Roadster Monterey Blue My Z Photo Library

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FREE! GTMat Automotive Sound Deadener	GTMat	Exterior & Interior	209	03-24-2013 10:00 PM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Forced Induction	2	07-17-2010 05:57 AM
Greddy Tuner Turbo Kit - limited time special! - FREE Ti-C Greddy turbo exhaust!	GT Motoring	Drivetrain/Engine	0	07-16-2010 07:26 PM

09-10-2012, 05:30 PM	#47 (permalink)
Red_Z Enthusiast Member Join Date: May 2012 Location: California Posts: 332 Drives: A red Z Rep Power: 16	installing mine this week. Will posts pic and review

09-10-2012, 06:50 PM	#48 (permalink)
AlphaSnacks A True Z Fanatic Join Date: Jan 2010 Location: Windermere, FL Posts: 1,618 Drives: '13 XKR-S, '10 370Z Rep Power: 19	Will call tomorrow!

09-11-2012, 01:34 PM	#50 (permalink)
AlphaSnacks A True Z Fanatic Join Date: Jan 2010 Location: Windermere, FL Posts: 1,618 Drives: '13 XKR-S, '10 370Z Rep Power: 19	Made my call. Sample on the way. Thanks, guys!

09-16-2012, 10:30 AM	#51 (permalink)
AlphaSnacks A True Z Fanatic Join Date: Jan 2010 Location: Windermere, FL Posts: 1,618 Drives: '13 XKR-S, '10 370Z Rep Power: 19	Got mine. I'll be installing it in the coming week or two.

09-16-2012, 04:33 PM	#52 (permalink)
Naenyn Base Member Join Date: Aug 2012 Location: Phoenix, AZ Posts: 212 Drives: '13 Magma Red Nismo Rep Power: 13	If this is still available when my Z gets here, I may give it a shot! =]

09-16-2012, 05:19 PM	#53 (permalink)
afbunn Base Member Join Date: Aug 2012 Location: North Ogden, Utah Posts: 116 Drives: 2009 370Z Sport M6 Rep Power: 13	Is this still available? If so, I'll call today.

10-12-2012, 03:18 PM	#58 (permalink)
Naenyn Base Member Join Date: Aug 2012 Location: Phoenix, AZ Posts: 212 Drives: '13 Magma Red Nismo Rep Power: 13	How do your products handle high heat scenarios? I live in Phoenix where the summers get rather toasty. I've read about other products falling apart, separating, becoming unglued, etc.