will this sub work with this box?

robbycarrion · 02-19-2012, 01:06 PM

sub
Rockford Fosgate T0D410 Power T0 10" subwoofer with selectable 2- or 8-ohm impedance at Crutchfield.com

box
Custom Sub Enclosure | Affordable Sub Box

i got a good amp to power it so thats all good.

robbycarrion · 02-19-2012, 01:07 PM

wanted to know if anyones ever done this setup before. see if theres anyhting i dont forseee in fitment of sub

bigaudiofanat · 02-19-2012, 01:18 PM

Looking at the specs the box can clear a 7 inch deep sub and the sub is 6.5 inches so yes it should be ok.

robbycarrion · 02-19-2012, 01:25 PM

how do you properly install a subwoofer to a box? Im going ot have a competent shop/buddy do most of the work, but i wanna cut costs when possible

TheOtherRob · 02-19-2012, 01:34 PM

You screw it in lol

bigaudiofanat · 02-19-2012, 01:48 PM

The proper way to securing the sub to the box is to make pilot holes before using wood screws to secure it. This way you do not split the MDF material.

90 ST · 02-20-2012, 07:32 PM

with a sub that heavy, and a box made with cheaper MDF you may want to use a T nut.

02-19-2012, 01:06 PM	#1 (permalink)
robbycarrion Base Member Join Date: Feb 2012 Location: Canton Posts: 17 Drives: 93 mazda rx7 touring Rep Power: 13	will this sub work with this box? sub Rockford Fosgate T0D410 Power T0 10" subwoofer with selectable 2- or 8-ohm impedance at Crutchfield.com box Custom Sub Enclosure \| Affordable Sub Box i got a good amp to power it so thats all good.

02-19-2012, 01:18 PM	#3 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Looking at the specs the box can clear a 7 inch deep sub and the sub is 6.5 inches so yes it should be ok. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

02-19-2012, 01:48 PM	#6 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	The proper way to securing the sub to the box is to make pilot holes before using wood screws to secure it. This way you do not split the MDF material. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which Step Lip Wheel: Work Meister S1, SSR Professor MS1, or Work Varianza T1S	HenryLee	Wheels & Tires	19	11-15-2011 04:00 PM
WORK Emotion 18" Staggered *** Free WORK RS Lug Nuts Promotion ($150 Value)	RavSpec	Tires/Wheels	2	10-17-2011 11:02 AM
WORK Emotion 18" Staggered (FREE WORK RS Lug Nuts Promotion - $150 Value)	RavSpec	Wheels & Tires	0	10-05-2011 03:38 PM
WORK Varianza T1S - 19" Staggered WORK Black Chrome + Swift Spring + Tires Clearance	RavSpec	Tires/Wheels	22	09-09-2011 10:39 PM
Free Work RS-Lug Nut Promotion w. Emotion Wheels & Work XC-8 Closeout Special!	DriveLineEric	Tires/Wheels	5	10-26-2010 03:29 PM

02-19-2012, 01:07 PM	#2 (permalink)
robbycarrion Base Member Join Date: Feb 2012 Location: Canton Posts: 17 Drives: 93 mazda rx7 touring Rep Power: 13	wanted to know if anyones ever done this setup before. see if theres anyhting i dont forseee in fitment of sub

02-19-2012, 01:25 PM	#4 (permalink)
robbycarrion Base Member Join Date: Feb 2012 Location: Canton Posts: 17 Drives: 93 mazda rx7 touring Rep Power: 13	how do you properly install a subwoofer to a box? Im going ot have a competent shop/buddy do most of the work, but i wanna cut costs when possible

02-19-2012, 01:34 PM	#5 (permalink)
TheOtherRob Base Member Join Date: Jun 2010 Location: Fl Posts: 170 Drives: 2008 350z Rep Power: 15	You screw it in lol

02-20-2012, 07:32 PM	#7 (permalink)
90 ST A True Z Fanatic Join Date: May 2010 Location: Calgary Posts: 1,861 Drives: 90 and 15 GMC Sierra Rep Power: 421	with a sub that heavy, and a box made with cheaper MDF you may want to use a T nut.