Suggestions for camera mount.

houkouonchi · 02-11-2012, 09:30 AM

For a while now I have been looking for a good way to mount a camera in my 370z. Right now I am looking for one that will work with a Contour HD.

I am looking for something that will be able to mount so the physical camera's position is around where the cruisecam I had mounted:

http://box.houkouonchi.jp/cruisecam/dsc_3393.jpg

The problem; however, is that the head rest mounts do not really work good in the 370z due to the whiplash protection which makes the head rest wiggle too much (not enough stability, too much jitter in the video).

I am looking for a different mount now. My daily video taping of when I am driving has been on hold for a while because of lack of a good mount but I am going to a track in a few weeks for event at work (a few other co-workers will also be going) so I wanna get a proper mount before that.

Mt Tam I am · 02-11-2012, 10:36 AM

Good luck. I use this:

Contour HD Plus Camera Heavy Duty Vehicle Window Suction Mount Roam Plus

Contour HD Plus Camera Heavy Duty Vehicle Window Suction Mount Roam Plus on eBay!

cossie1600 · 02-11-2012, 10:59 AM

put some spacers (rubber hoses) on the mount and that should stop the vibration. I use the same thing on my contour mount, let me know if you need a video or pictures

houkouonchi · 02-22-2012, 01:47 PM

Thanks Mt Tam I am

I ended up basically using one of those (I really only needed the ball end for the contour HD). I actually used the one I got due to the suction cup being in better condition but I used the extension I had on my other one (which ended up not working good for my other camcorder) to have a little bit control of the shot I got.

In the end I am pretty happy with it but there is still some slight vibration (possibly from the extension arm) but much better than it was before.

Here is some pictures. Kind of hard to see with the glare on the first one and the fact it was a taken with my phone's camera =(. The first one is from outside and the second one is from the passenger seat inside:

Japanjay · 05-09-2012, 12:52 PM

Best camera angle I have found for my GoPro is exactly where you have yours mounted but outside and looking over the roof line down thw hood. Nice wide clear unobstructed view and good outside sounds of cars near you.

cossie1600 · 05-10-2012, 12:35 PM

Shot at 2012-05-10

This is my angle using my Contour cam with the seat pulled all the way forward

ankaka · 05-31-2012, 09:36 PM

Quote:

Originally Posted by Mt Tam I am

Contour HD Plus Camera Heavy Duty Vehicle Window Suction Mount Roam Plus

02-11-2012, 09:30 AM	#1 (permalink)
houkouonchi Enthusiast Member Join Date: Jun 2010 Location: Ontario, California Posts: 440 Drives: '14 GT-R '10 M6 370z Rep Power: 14	Suggestions for camera mount. For a while now I have been looking for a good way to mount a camera in my 370z. Right now I am looking for one that will work with a Contour HD. I am looking for something that will be able to mount so the physical camera's position is around where the cruisecam I had mounted: http://box.houkouonchi.jp/cruisecam/dsc_3393.jpg The problem; however, is that the head rest mounts do not really work good in the 370z due to the whiplash protection which makes the head rest wiggle too much (not enough stability, too much jitter in the video). I am looking for a different mount now. My daily video taping of when I am driving has been on hold for a while because of lack of a good mount but I am going to a track in a few weeks for event at work (a few other co-workers will also be going) so I wanna get a proper mount before that.

02-11-2012, 10:36 AM	#2 (permalink)
Mt Tam I am A True Z Fanatic Join Date: Jun 2010 Location: California Posts: 10,709 Drives: 370Z T/S/N 6MT & XKE Rep Power: 3842	Good luck. I use this: Contour HD Plus Camera Heavy Duty Vehicle Window Suction Mount Roam Plus Contour HD Plus Camera Heavy Duty Vehicle Window Suction Mount Roam Plus on eBay! __________________ "Does the carpet match the drapes? NO!!! I don't date bald women." Nissan Motorsports 34R Oil Cooler. Stillen CBE. Hotchkis Sport Sway Bars. KW Variant 3 Coilover System. Stillen Gen3 CAI. Michelin Pilot Super Sport. Stillen Brake Ducts. Carbotech™ XP10/XP8 Pads. Z1 Front Rotors. Z1 Stainless Brake Lines. Two degrees of camber

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Cheap in-car camera mount	MightyBobo	DIY Section (Do-It-Yourself)	33	08-26-2018 05:48 PM
In-car Camera Mount Review	TongMan	Exterior & Interior	10	04-12-2012 03:47 PM
DIY Adjustable In-car Camera Mount	RedNismo	DIY Section (Do-It-Yourself)	4	01-21-2011 01:36 PM
suggestions for new digital camera	Hi-Step'n370Z	Photography	30	08-02-2010 01:25 PM
Camera Mount Design	scruffydog	Exterior & Interior	16	06-07-2010 08:01 PM

02-11-2012, 10:59 AM	#3 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 29	put some spacers (rubber hoses) on the mount and that should stop the vibration. I use the same thing on my contour mount, let me know if you need a video or pictures

02-22-2012, 01:47 PM	#4 (permalink)
houkouonchi Enthusiast Member Join Date: Jun 2010 Location: Ontario, California Posts: 440 Drives: '14 GT-R '10 M6 370z Rep Power: 14	Thanks Mt Tam I am I ended up basically using one of those (I really only needed the ball end for the contour HD). I actually used the one I got due to the suction cup being in better condition but I used the extension I had on my other one (which ended up not working good for my other camcorder) to have a little bit control of the shot I got. In the end I am pretty happy with it but there is still some slight vibration (possibly from the extension arm) but much better than it was before. Here is some pictures. Kind of hard to see with the glare on the first one and the fact it was a taken with my phone's camera =(. The first one is from outside and the second one is from the passenger seat inside:

05-09-2012, 12:52 PM	#5 (permalink)
Japanjay Track Member Join Date: Mar 2012 Location: Puyallup Posts: 856 Drives: 09 Nissan 370z MB M6 Rep Power: 14	Best camera angle I have found for my GoPro is exactly where you have yours mounted but outside and looking over the roof line down thw hood. Nice wide clear unobstructed view and good outside sounds of cars near you.

05-10-2012, 12:35 PM	#6 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 29	Shot at 2012-05-10 This is my angle using my Contour cam with the seat pulled all the way forward