OK, so I'm instaling my Pioneer x920BT in my NISMO with a Scosche harness and I have the following questions: 1. The Scosche has an Orange/white and an Orange/black. Which
|
|
LinkBack | Thread Tools | Display Modes |
|
11-08-2010, 08:45 PM | #1 (permalink) |
Base Member
Join Date: Mar 2010
Location: Miami, FL
Posts: 114
Drives: '10 PW 370Z NISMO
Rep Power: 15 |
Wiring Help!
OK, so I'm instaling my Pioneer x920BT in my NISMO with a Scosche harness and I have the following questions:
1. The Scosche has an Orange/white and an Orange/black. Which goes to illumination (orange/white) on the Pioner harness? 2. The Scosche harness has a blue wire. Does this go to the system remote (blue/white on the Pioner harness? 3. Where does the car speed signal input (pink) from the Pioneer harness go? 4. Where do I connect the reverse gear signal (violet/white) from the pioneer harness? Thanks! |
11-09-2010, 08:01 AM | #2 (permalink) |
Base Member
Join Date: Mar 2010
Location: Miami, FL
Posts: 114
Drives: '10 PW 370Z NISMO
Rep Power: 15 |
here's what it looks like so far:
Scosche harness Whre does the Orange/black wire go? Sosche, Pioneer and Metra Axxess ASWC Pioneer harnesses (HU ends) Notice, I have already moved the Mute wire over (for the bypass - pin came right out...30 seconds BTW) and soldered it to the parking brake and ground wire. Also, notice the two wires I have yet to connect to anything...speed sensor (violet/black) and reverse signal (pink/white). |
11-09-2010, 11:40 AM | #3 (permalink) |
Base Member
Join Date: Jul 2009
Location: San Antonio
Posts: 223
Drives: 10 Armada
Rep Power: 15 |
The blue and white wire on the Pioneer is a remote turn on lead for an external amp and needs to be connected to the blue wire from the antenna adapter.
Orange and white on the scosche harness goes to the orange on the Pioneer harness. Not sure where to connect the speed sensor wire I'd like to know also but, the GPS will work without it. You can pick up the reverse signal wire in the wire harness thats in the drivers kick panel next to the fuse box.
__________________
STILLEN G3 / F.I. TDX (NO RESONATORS) / F.I. LTH / UpRev Tuned / BC-Racing ER Coilovers / DIY Oil Cooler / Short Shifter Last edited by pg6speed; 11-09-2010 at 11:49 AM. |
11-09-2010, 12:47 PM | #4 (permalink) |
Base Member
Join Date: Mar 2010
Location: Miami, FL
Posts: 114
Drives: '10 PW 370Z NISMO
Rep Power: 15 |
Thanks!
One question though: Where is this "antenna adapter"? As you can see in the photo, I have connected the blue/white from the Pioneer to the blue from the Scosche harness. Is this correct? |
11-09-2010, 01:28 PM | #6 (permalink) |
Base Member
Join Date: Jul 2009
Location: San Antonio
Posts: 223
Drives: 10 Armada
Rep Power: 15 |
You have to purchase the antenna adapter separate. It will have a blue wire coming off of it. Hook that blue wire to the blue/white wire from the head unit.
__________________
STILLEN G3 / F.I. TDX (NO RESONATORS) / F.I. LTH / UpRev Tuned / BC-Racing ER Coilovers / DIY Oil Cooler / Short Shifter |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
re-wiring to keep vdc off | boosted180 | DIY Section (Do-It-Yourself) | 26 | 02-01-2010 11:12 AM |
Wiring adapter? | 1slow370 | Audio & Video | 11 | 01-06-2010 02:56 PM |
Speaker Wiring | bpd138 | Audio & Video | 24 | 09-04-2009 02:36 PM |
Amp Wiring Path | JerryK | Audio & Video | 6 | 05-08-2009 12:18 AM |
wiring harness | 510z | Audio & Video | 4 | 04-30-2009 06:05 PM |