![]() |
Quote:
|
Anyone else that has issues with the SRS light flashing after install cuz you turned the car on while the passenger airbag light was disconnected, can refer to the following thread on instructions to reset it:
http://www.the370z.com/audio-video/2...reset-srs.html |
My kit arrived last night *whoop*. Got it installed straight away and all works perfect! I need to change the draw line numbers as I have installed the cam on the other side of the hatch release button as it left more space to get the license plate lights in and out and (on my car at least) meant the wire was closer to the grommet for the wiring harness back into the rear hatch. I think there are just some co-eff numbers I can swap over and it will flip the side of the car it thinks its on.
I am doing my sound deadening on Friday, so will be back with more pics of where and how I did stuff, feel free to add them to your how to if you like Brian. Be prepared for a few more orders from the UK when I post it up on our site too ;) |
Quote:
I thought about mounting on the other side. As you say it is a little easier but there were a couple of reasons I chose the other side. 1) At least on mine and Jeff's cars the clip where the cable could be routed was on right of the license plate lights (looking at the back of the car). 2) Also either way you want it as close to the center of the car to get the best image. 3) That was the side the Nissan's had them on and the basis for some of the donor settings. Not that I don't think that you cant change those and get it to work Note: With the full kits I trim the bracket so it fits. Was there holes behind the license plate? On the US cars there is and that makes routing/fishing fairly easy. With the UK/EU GT-Rs from what I've seen they are not there so you have to fish straight from the grommet to the license plate light. Let me know if you want some help with the numbers, you might just be able to change the offset to a negative. More pictures are always appreciated as in any input to improve the instructions. Like adding a section on installing on the other side. |
Ahh, ok that makes sense. On mine, yes the clips are on the right hand side of the light units also, so cables would be closer to the clip for feeding through. I thought it was a bit close to the clip to be able to get the bulb in and out if required. Also didnt realise that the left hand side was closer to the centre of the car. I can easily swap it over to that side if needs be though, no biggie.
With the license plate holes, I didnt take my plate off. I fed a bit of 2 core wire through the grommit and down to the floor, then made a "hook" out of the end and hooked it in the hole for the bulb holder. Taped the cam wire to that and pulled it all back through :) I'll have a play with the numbers, but may just move it over to the other side of the release button if the numbers are hard to work out. Keeps it easier to work with if we all have the cam in the same place I guess. |
I have a 09 and im on the list. Can i pay? are 09's not getting theirs yet? Im lost
Dont wanna look through 14 pages loooking for the answer :P |
Soooo when's this bypass kit coming out :tup:
|
09's are pending enough people answering the PM and sending their contact information. You will get a PayPal invoice when the buy is a go.
http://www.the370z.com/audio-video/2...tml#post815857 |
Quote:
|
WOOT WOOT!
First backup camera kit to factory Nav head on a 2010 in Canada! Installed the system tonight in 2 hours and it works like advertised, no problems at all! Thanks guys! Great product and service :tup: |
Quote:
|
Quote:
|
Quote:
Frank |
Quote:
|
Awesome job guys!:tup:
|
All times are GMT -5. The time now is 05:44 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2