Subscribed!

You better not get this mod before me dj! :stirthepot:

:bowrofl: Is that the Nintendo code for Extra guys in Contra? :tup:

:ugh2:

I installed my R35 start button today. The Nav screen was only an additional 2 screws after I pulled the center dash off. This is what I was looking for in case anyone else wanted to see it as well.

http://i238.photobucket.com/albums/f...-55-16_287.jpg

http://i238.photobucket.com/albums/f...-55-01_182.jpg


Actually it's ^v ^v <> <> BA BA select http://www.the370z.com/attachments/d...gtr-button.jpg

It's not. :shakes head:

Delro, how does one access that menu that you have shown in the picture?

I don't mean to take Delro's response, but I was able to get to that menu, so here is how I did it.
First you have to get it to the "diagnostic mode". I read someone's post, sorry I don't remember who wrote it. To do so push the start button once to get turn the car on, but not the engine, dont press down on the clutch or brake depending on your trans. Then turn off the radio. Hold down the settings button and turn the volume knob a couple of times until something similar to "system self test" and "confirmation" comes up on the screen. Click on confirmation and scroll down to camera. Click on camera syst type and you should get to that menu. I just did it on my 2010, so I'm not sure if it's the same procedure for 2009's
Hope that helps

Sorry for the late response Jeffblue. I didn't see the first time you asked. PontualZ is correct for the most part. Although I think you can do it with the starter in the ON position or with the engine running. Turn off your radio, hold down setting button and turn volume control counter-clockwise about 3-4 full turns until the screen changes. You will be taken to a diagnostics screen where you can access numerous features.
http://i238.photobucket.com/albums/f...-38-56_462.jpg

Here are the camera adjustments....
http://i238.photobucket.com/albums/f...-39-11_885.jpg

Once you make changes just turn your radio back on and the system will reboot with the new settings.
If you turned the camera settings to on, then after you reboot and shift into reverse you will see this screen.
http://i238.photobucket.com/albums/f...-24-07_333.jpg

I'm currently working with someone who is assisting me in creating a harness to plug in without any mods to the current wiring. As soon as I test it I will get a DIY going and talk to the guy to see if he's interested in producing a few kits to make it easier on everyone. From the work I've seen it'll be as good as OEM with no additional drilling, wiring, or soldering. Just plug-n-play and quite possibly for 1/2 the $$$ from the factory. :excited:

Thanks both of you
DeLRo, that would be really awesome if that piece works. keep us updated:excited:

I just might do that...so that you can admire it at coffee. :rofl2:

In for updates.

it looks like the solution is surely aftermarket, since based on what i've found out today, anything from nissan is going to be a while, if they even do release the OEM part for the 2011 it will be a while. updates in the other thread:
http://www.the370z.com/audio-video/2...-camera-2.html

Looks like from the above options on the 2010 model all we need is the cable and the camera :excited:

I'd like to know how this works as well...would love to keep the factory screen looking as is but with the backup camera...

you're in luck, thats exactly what we've been able to do. read through this thread and send a PM to bdl99 if you are interested in his kit after browsing the thread.

http://www.the370z.com/audio-video/2...ew-camera.html