Window Module Question

SoCal 370Z · 03-10-2009, 09:51 PM

Just finished installing the factory lighted "Z" door sills which means disconnecting the battery, and having to reset the auto windows. Here is how from the manual:

If the windows do not close automatically

If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power
window system.

1. Push the ignition switch to the ON position.

2. Close the door.

3. Open the window completely by operating
the power window switch.

4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.

5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.

6. Perform steps 2 through 5 above for other
windows.

If the power window automatic function does
not operate properly after performing the procedure
above, have your vehicle checked by a
NISSAN dealer.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
General question???	Xavier Raymond	Nissan 370Z General Discussions	7	03-09-2009 04:08 AM
7AT Question	sbkim	Engine & Drivetrain	5	03-06-2009 02:22 PM
370z auto window	bkunzi01	Nissan 370Z General Discussions	7	03-02-2009 10:32 AM
Question Ordering a Z	Devil Z	Nissan 370Z Pricing / Ordering Discussions	10	02-13-2009 08:35 AM
Question about red on 370z	sbkim	Nissan 370Z Photos / Spyshots / Video / Media Gallery	8	01-27-2009 07:00 PM

03-10-2009, 09:51 PM	#2 (permalink)
SoCal 370Z A True Z Fanatic Join Date: Feb 2009 Location: US of A Posts: 2,842 Drives: Answers Rep Power: 34	Just finished installing the factory lighted "Z" door sills which means disconnecting the battery, and having to reset the auto windows. Here is how from the manual: If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for other windows. If the power window automatic function does not operate properly after performing the procedure above, have your vehicle checked by a NISSAN dealer.