HKS Camp 2 Installed on 370Z

terrycs · 10-25-2010, 10:53 AM

The thing that sux about CAMP2 is that it is not designed to output AFR unless you use their ECU (eg F-CON iS). However, I've heard that GTM has a work around. Those with FI that are interested should contact them. In addition, you need their I/F module if you want to add external sensors.

If AFR is not desired, both solutions should do the job. Just figure out what you want to monitor and the total pacakage cost WITH sensors to make your decision. You should also consider a carPC solution where it can do a bunch of other stuff.

I don't have any experience with Magden, but I've been pretty happy with the CAMP2 tho. I only wish they had a built in speaker module for their audible alarms instead of playing through the car's speakers.

triggaZ · 10-26-2010, 10:37 AM

The last two post are prefect enough for me to get the Camp2. I also want to have a wideband reading on it so i'll ask GTM how they can get that information..

thanks again.

pty370z · 10-26-2010, 06:04 PM

Is the Nissan CONSULT harness required or are you good to go with just the unit..??

terrycs · 10-26-2010, 06:19 PM

Quote:

Originally Posted by pty370z

Is the Nissan CONSULT harness required or are you good to go with just the unit..??

No. It should come with an OBD2 cable.

JB-370z · 10-26-2010, 08:18 PM

Quote:

Originally Posted by pty370z

Is the Nissan CONSULT harness required or are you good to go with just the unit..??

The consult harness is not required. The g35\g37\350z\370z all work with the HKS Camp2 with no harness according to HKS. Plug and play, running the cables to the glove box where I mounted my Camp2 was easy as well.

Once Pioneer releases a new 7" monitor or find one I like, I will be custom fabbing a 2nd screen above my nav unit for a dedicated engine monitoring setup. Dreamer beat me to it

However I would like to eventually solder the OBDII cable to the factory wires. Or by one of these bad boys so I can continue to have and open OBD2 port.
OBD Diagnostics, Inc. - OBD2 Y Cable

This is a picture I took before I tuned the unit.

10-25-2010, 10:53 AM	#1 (permalink)
terrycs Base Member Join Date: Dec 2008 Location: La Palma, CA Posts: 123 Drives: 07 G35S Sedan Rep Power: 256	The thing that sux about CAMP2 is that it is not designed to output AFR unless you use their ECU (eg F-CON iS). However, I've heard that GTM has a work around. Those with FI that are interested should contact them. In addition, you need their I/F module if you want to add external sensors. If AFR is not desired, both solutions should do the job. Just figure out what you want to monitor and the total pacakage cost WITH sensors to make your decision. You should also consider a carPC solution where it can do a bunch of other stuff. I don't have any experience with Magden, but I've been pretty happy with the CAMP2 tho. I only wish they had a built in speaker module for their audible alarms instead of playing through the car's speakers. Last edited by terrycs; 10-25-2010 at 11:00 AM.

10-26-2010, 06:04 PM	#3 (permalink)
pty370z Track Member Join Date: Apr 2009 Location: Panama City, Panama Posts: 654 Drives: over the speed limit Rep Power: 18	Is the Nissan CONSULT harness required or are you good to go with just the unit..?? __________________ 2010 Solid Red 370Z * *Touring-Sport-6MT Black Interior Performance:** STILLEN * BERK * UR * MISHIMOTO * K&N * Z1 * ZSPEED * UPREV * DBA Interior: GT-R Red Start/Stop Button * MSA Floor Mats * PW:JDM Exterior: INGS+1 * SEIBON * FUJIMURA * PW:JDM * UAM * KICS * VOLK

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket Unit that could be installed in 370z Cubbyhole?	Asheth	Audio & Video	2	12-23-2008 11:22 AM
Four Camp Marines were arrested and charged with execution	AK370Z	The Lounge (Off Topic)	0	11-06-2008 11:30 PM

10-26-2010, 10:37 AM	#2 (permalink)
triggaZ Base Member Join Date: May 2010 Location: 213 Posts: 96 Drives: 日産 Rep Power: 16	The last two post are prefect enough for me to get the Camp2. I also want to have a wideband reading on it so i'll ask GTM how they can get that information.. thanks again.