To my knowledge all the fields but but the optional ones work. If you pay someone to install this than its just because your a lazy @ss that cant plug few things into eachother. This mod may be just as eazy to install as its easy to take a $hit.
Yes its easy to install. I have a few pics I will upload now. But I will update this weekend with the final pictures and vids with a full review.
I am installing the Pioneer AVIC-Z110BT this weekend. So at this point I will take some media to share with you guys.
Where is the best place to install? All the cables seem like they could reach just about anywhere.

Any updates?

Try to get somthing up by sat. Calibration is a B!tch with this unit, but it does its job. Anywho I will try to write a review but I need to contact HKS about a few things so I might wait on the review until then and just post a vid and some pictures.

That sound good. Thanks man!

nice i want one for my G

well are cars are bluetooth capible so will there ever be a blue tooth OBD-II dongle that will use are navs without the garmin?

i found it new here for $444.05
HKS CAMP2 Engine Monitoring System All Makes - 48001-AK001

bump.

More info needed. I'm tied between Camp 2 or Magden carputer.

What info are you looking for?
HKS is a full system where Magden is now officially just software. I have had mine on for around 3 months and loving it. It reads everything I need, had to purchase a few of the extras for boost and such but worth it with the supercharger.

Here is my standard pictures I have, nothing great:
http://lh3.ggpht.com/_wgFNZZBDMaE/TE...Screen%201.jpg
http://lh6.ggpht.com/_wgFNZZBDMaE/TE...Screen%203.jpg
http://lh6.ggpht.com/_wgFNZZBDMaE/TE...Screen%205.jpg

The thing that sux about CAMP2 is that it is not designed to output AFR unless you use their ECU (eg F-CON iS). However, I've heard that GTM has a work around. Those with FI that are interested should contact them. In addition, you need their I/F module if you want to add external sensors.

If AFR is not desired, both solutions should do the job. Just figure out what you want to monitor and the total pacakage cost WITH sensors to make your decision. You should also consider a carPC solution where it can do a bunch of other stuff.

I don't have any experience with Magden, but I've been pretty happy with the CAMP2 tho. I only wish they had a built in speaker module for their audible alarms instead of playing through the car's speakers.

The last two post are prefect enough for me to get the Camp2. I also want to have a wideband reading on it so i'll ask GTM how they can get that information..

thanks again.

Is the Nissan CONSULT harness required or are you good to go with just the unit..??

No. It should come with an OBD2 cable.

very nice!..i'll have to talk to Sam about this one..

The consult harness is not required. The g35\g37\350z\370z all work with the HKS Camp2 with no harness according to HKS. Plug and play, running the cables to the glove box where I mounted my Camp2 was easy as well.

Once Pioneer releases a new 7" monitor or find one I like, I will be custom fabbing a 2nd screen above my nav unit for a dedicated engine monitoring setup. Dreamer beat me to it :icon23:

However I would like to eventually solder the OBDII cable to the factory wires. Or by one of these bad boys so I can continue to have and open OBD2 port.
OBD Diagnostics, Inc. - OBD2 Y Cable

http://i29.photobucket.com/albums/c2...g?t=1288142885
This is a picture I took before I tuned the unit.
http://i29.photobucket.com/albums/c2...g?t=1288143006