Lets talk about subs for a Zenclosures box

Boosted Josh · 06-01-2010, 09:24 PM

I found out that my 500/1 will fit under the seat. So I sold my 450/4 on eBay and will be picking up a 300/2 for the front stage. The 300/2 is the same size as the 500/1 so it should work.

I think the jl slash series are good enough to handle being stuck under the seat without much air.

I also picked up a Rockford fosgate 3sixty.2 for the factory intergration.

Now I've got to decide if I want to run my 10w7 in the zenclosures box or not. They can cut the box for the 12" to fit the 10w7 but it is going to be a little smaller than what JL recommends. I've also got to figure out how to mount the 3 bar grill to protect the sub.

I could do it in an upfiring box but I don't know how it would sound.

The other option is to ditch the w7 and pick up something better suited to the boxes available.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HT Talk	bigaudiofanat	The Lounge (Off Topic)	169	11-29-2011 07:07 PM
Lets Play a New Forum game ..... Possible NSFW	AK370Z	The Lounge (Off Topic)	77	12-02-2010 08:49 PM
Talk about control	AK370Z	The Lounge (Off Topic)	23	02-22-2010 05:33 PM
Plane Talk	BanningZ	The Lounge (Off Topic)	7	08-11-2009 09:44 PM

06-01-2010, 09:24 PM	#22 (permalink)
Boosted Josh Base Member Join Date: Apr 2010 Location: Alabama Posts: 85 Drives: 09 370Z Rep Power: 17	I found out that my 500/1 will fit under the seat. So I sold my 450/4 on eBay and will be picking up a 300/2 for the front stage. The 300/2 is the same size as the 500/1 so it should work. I think the jl slash series are good enough to handle being stuck under the seat without much air. I also picked up a Rockford fosgate 3sixty.2 for the factory intergration. Now I've got to decide if I want to run my 10w7 in the zenclosures box or not. They can cut the box for the 12" to fit the 10w7 but it is going to be a little smaller than what JL recommends. I've also got to figure out how to mount the 3 bar grill to protect the sub. I could do it in an upfiring box but I don't know how it would sound. The other option is to ditch the w7 and pick up something better suited to the boxes available.