Running speaker wire from door

NissanParty · 04-17-2022, 11:45 PM

Hello, for any of you who installed new speakers and ran new wire, where did you route the wire from the door to the body of the car?

I am considering upgrading my stock system. I would get components, an amp, tap into the preamp inputs to make RCAs to a DSP, and probably something like a wicked CAS enclosure for the sub.

SeeThruHead · 04-18-2022, 12:12 AM

I haven't done mine yet but i'm going to do this:

NissanParty · 04-18-2022, 11:34 PM

Quote:

Originally Posted by SeeThruHead

I haven't done mine yet but i'm going to do this:

Thanks very much! I was hoping... it was not something like this. I didn't look at mine yet, but I was hoping it wasn't a plug like that with no place for a little speaker wire to squeak through. This would probably take me 1-2 hours per side! What a pain! Well, we only have to do it once.

Thanks again for the video!

NissanParty · 04-12-2023, 10:08 PM

Did you do it yet???

How much of a pain is it to get the door panel off?

redondoaveb · 04-12-2023, 11:36 PM

Quote:

Originally Posted by NissanParty

Did you do it yet???

How much of a pain is it to get the door panel off?

I don't know how hard the wiring part is but I can remove the door panel in just a few minutes. There are YouTube videos on it.

ZStalker505 · 06-06-2023, 05:23 PM

I don't see why you couldn't just cut the rubber inside the door feed the wire through and cut the rubber on the inside of the car to get the wire out?

NissanParty · 06-06-2023, 05:37 PM

Quote:

Originally Posted by ZStalker505

I don't see why you couldn't just cut the rubber inside the door feed the wire through and cut the rubber on the inside of the car to get the wire out?

I don't think there is anywhere that you can squeeze a wire in the grommet. But I ended up using the stock wiring and didn't run new wire since I am only 90w RMS on the door speakers. It sounds amazing!

R1talin · 06-06-2023, 06:20 PM

It is not hard but it takes time. You have to run it through the existing door harness. I bought a wire puller and drilled through the plastic harness to run the wires through. Once that is done just solder it and forget it.

04-17-2022, 11:45 PM	#1 (permalink)
NissanParty Base Member Join Date: Feb 2022 Location: Southern California Posts: 112 Drives: 370z Nismo Rep Power: 32	Running speaker wire from door Hello, for any of you who installed new speakers and ran new wire, where did you route the wire from the door to the body of the car? I am considering upgrading my stock system. I would get components, an amp, tap into the preamp inputs to make RCAs to a DSP, and probably something like a wicked CAS enclosure for the sub.

04-18-2022, 12:12 AM	#2 (permalink)
SeeThruHead Track Member Join Date: Jun 2020 Location: Toronto Posts: 715 Drives: Red '18 Sport Manual Rep Power: 23497	I haven't done mine yet but i'm going to do this: __________________ My Build thread STH Build Plan Thread Images too big fix here

06-06-2023, 06:20 PM	#8 (permalink)
R1talin Base Member Join Date: Mar 2017 Location: FL - Florida Posts: 60 Drives: 16 370z Nismo 6MT Rep Power: 6718	It is not hard but it takes time. You have to run it through the existing door harness. I bought a wire puller and drilled through the plastic harness to run the wires through. Once that is done just solder it and forget it. __________________ Motordyne ART Pipes/Shockwave Exhaust, Stillen Long Tube CAI, Fortune Auto Coil-Overs, Z1 - Urethane Motor & Transmission Mounts/Subframe Bushing Collars/Solid Diff Bushings & Brace/34 Row Oil Cooler/Sway Bars/End Links, BTUNED Ecutek Tune

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Door Panel Removal & Door Speaker Size	jikhead	DIY Section (Do-It-Yourself)	46	07-16-2016 10:04 PM
Installed passenger door speaker and now driver side speaker stopped working?	w4kj4k	Audio & Video	1	07-06-2014 06:24 PM
Quick help needed. Speaker wire from hatch.	vermithrax	Audio & Video	1	08-10-2012 05:14 PM
Door speaker wire DIY	370ZilverZ	DIY Section (Do-It-Yourself)	0	04-23-2012 11:41 AM
speaker wire to rca unit	x102x	Audio & Video	9	07-07-2011 10:48 PM

04-12-2023, 10:08 PM	#4 (permalink)
NissanParty Base Member Join Date: Feb 2022 Location: Southern California Posts: 112 Drives: 370z Nismo Rep Power: 32	Did you do it yet??? How much of a pain is it to get the door panel off?

06-06-2023, 05:23 PM	#6 (permalink)
ZStalker505 Base Member Join Date: Jan 2023 Location: NM Posts: 152 Drives: 14 SC Nismo Rep Power: 2	I don't see why you couldn't just cut the rubber inside the door feed the wire through and cut the rubber on the inside of the car to get the wire out?