Nissan 370Z Forum
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Audio & Video (http://www.the370z.com/audio-video/)
-   -   NAV System Successfully Removed (http://www.the370z.com/audio-video/109488-nav-system-successfully-removed.html)

Tokugawa 12-07-2015 03:00 PM
Quote:
Originally Posted by bigaudiofanat (Post 3362040)
LOL I can always hook you up.
Lol no worries:) I will hold you to that:)

scope22 12-08-2015 04:11 PM
Quote:
Originally Posted by Tokugawa (Post 3361724)
I will follow up with a complete DYI when I have time but in short yes you need to add a Non Navigational pigtail into your Z the plugs are different between the two units.
Any quick help to which wires i need splice the base pig tail?

VABAM 12-09-2015 10:04 AM
Awesome work Tokugama!

You beat me to it! :rofl2:

I've wanted to delete the factory nav in my 09 for awhile. Recently I went through the service manual and figured out how but it was all theory until I saw this post. :tup:

As soon as you get a chance please post where you spliced in/connected to so I can verify what I found. Also please post where you got the pigtail from. I've been looking everywhere for one.

Thanks! :tiphat:

Tokugawa 12-09-2015 01:37 PM
Quote:
Originally Posted by VABAM (Post 3363749)
Awesome work Tokugama!

You beat me to it! :rofl2:

I've wanted to delete the factory nav in my 09 for awhile. Recently I went through the service manual and figured out how but it was all theory until I saw this post. :tup:

As soon as you get a chance please post where you spliced in/connected to so I can verify what I found. Also please post where you got the pigtail from. I've been looking everywhere for one.

Thanks! :tiphat:
>>> Thank you Sir.... Yes Unfortunitly its going to be a while for the DIY (Sorry Guys) as I have a ton of stuff going on at the moment, I got the pigtail from a wrecked Z. (RIP)

VABAM 12-09-2015 01:51 PM
Quote:
Originally Posted by Tokugawa (Post 3363984)
>>> Thank you Sir.... Yes Unfortunitly its going to be a while for the DIY (Sorry Guys) as I have a ton of stuff going on at the moment, I got the pigtail from a wrecked Z. (RIP)
That sucks. I was hoping you found some one that sold them.

Tokugawa 12-09-2015 04:13 PM
Quote:
Originally Posted by VABAM (Post 3363995)
That sucks. I was hoping you found some one that sold them.
Researching it, I may start selling them still looking into it:)

hjo1078 12-09-2015 04:16 PM
I would buy that part off u. Lol.


Sent from my iPhone using Tapatalk

Tokugawa 12-09-2015 04:45 PM
Quote:
Originally Posted by hjo1078 (Post 3364115)
I would buy that part off u. Lol.


Sent from my iPhone using Tapatalk
Lol thanks

VABAM 12-10-2015 09:48 AM
Quote:
Originally Posted by Tokugawa (Post 3364111)
Researching it, I may start selling them still looking into it:)
Quote:
Originally Posted by hjo1078 (Post 3364115)
I would buy that part off u. Lol.


Sent from my iPhone using Tapatalk
I second that! :icon17:
Tokugawa if you are able to source them I would definitely buy one off of you. :tup:

bigaudiofanat 12-10-2015 12:25 PM
I think sense they are part of a MAIN harness it's not going to be something you can just buy. Maybe find at a salvage yard but otherwise that's like buying the entire main harness for one little piece. If we can find out what harness end that is maybe I can order them and add the pins/wires. Someone want to find that for me?

VABAM 12-10-2015 04:26 PM
MORE UPDATED INFO!!!!! 4 JAN 2016
Until Tokugawa posts his DIY (edit: Tokugawa's DIY:http://www.the370z.com/diy-section-d...onversion.html), here is some info to help satisfy people’s curiosity on how the Nav system A/C controls are switched over to Non-Nav.
Tokugawa please let me know if this right; got a feeling I’m missing something.
Bigaudiofanat the below does include info that might be find helpful finding that connector.

( Click to show/hide )

Disclaimers:
I pulled this info from the 2009 370Z Service manual. Might be different for other model years. Down load you own copy of the 370Z Service manual for your year 370Z and verify the below info. (link: Nissan 370Z Owners Manual / Service Manuals - Nissan 370Z Forum)

This is not a beginners DIY! If you are not comfortable with/know how to; read pin outs, read wiring diagrams, splicing into wiring harnesses, adding pins to connectors, locating pins on connectors, then this is not the DIY for you. If wired improperly you could damage the HVAC system.

I feel the need to add this due to the Society we live in: Any attempt to do this NAV system Conversion DIY is at the risk of the person attempting it. I will not be held responsible for any damage caused by attempting this DIY. It is the responsibility of the person attempting this to verify the below information and/or consult with a mechanic/expert before attempting this DIY.

( Click to show/hide )

Some basic info: Both the NAV and Non-NAV have the same A/C settings; auto mode, temp range, blower speed, etc. The A/C Auto Amp is the brains of the A/C system in the 370Z and is differnt between NAV and Non-NAV model 370Zs. The other difference between the NAV and Non-NAV is how the controller for each system talks to the A/C Auto Amp. The Non-NAV has a direct connection vice the NAV talks to it via the CAN Bus.

Here is the wiring diagram for the Non-NAV system including where the NAV system would tie in:

http://www.the370z.com/members/vabam...-would-tie.jpg


Here are the pin outs for the two plugs/connectors you would need to work with.
On the diagram H.S. means harness (wire) side of the connector.

M67 is the connector going into the back of the Non-NAV Controller.
(you'll need to source this connector to complete this)
http://www.the370z.com/members/vabam...controller.jpg

M66 is the connector going into the A/C Auto Amp.
http://www.the370z.com/members/vabam...c-auto-amp.jpg

You would need to wire:
Pin 5 of M67 to pin 6 of M66
Pin 4 of M67 to pin 7 of M66
Pin 1 of M67 to pin 20 of M66
Pin 6 of M67 to ground

Possible illumintaion wiring.
Pin 2 of M67 to pin 3 of M256
Pin 3 of M67 to pin 4 of M256

M256 is the hazard lights switch connector, pin out below.
http://www.the370z.com/members/vabam...cation-m67.jpg


Then swap out the A/C Auto Amp
From:
NAV A/C Auto Amp part # 27760-1EA1A
To:
Non-NAV A/C Auto Amp part # 27760-1EA0A


Enjoy! :tup:


If something is wrong let me know.
I hate putting out bad info.

Tokugawa 12-13-2015 12:44 AM
I will be having some downtime soon so I will be working on the DIY for you guys.. So with that said has there been an issue in doing this....I'm new to the forum so not sure....please provide some feedback

VABAM 12-13-2015 10:05 AM
Quote:
Originally Posted by Tokugawa (Post 3366680)
I will be having some downtime soon so I will be working on the DIY for you guys.. So with that said has there been an issue in doing this....I'm new to the forum so not sure....please provide some feedback
Doing good so far! Keep it up!:tup:

Tokugawa 12-14-2015 08:46 AM
DIY Online
 
Look at the DIY, its posted:)

Parello9 01-03-2016 04:32 AM
Im still confused on which ac wires need to plug where?


All times are GMT -5. The time now is 05:20 PM.
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2