My Nissan 370z full Audio Install
 

Hello 370z owners

I recently got my 370z I will be uploading photos of the car on a later dates but know I am wanting to do an installing video of all the modifications I plan on doing. The first part is audio and sound proofing since everyone knows the sound density in the 370Z isn't the best.

This is a video of the start of the build.
In this video I will be showing what I am using to install in my 370Z.



With two new upgrades on the way

* Vibe Black Death 15inch 4500watt 1500rms Sub.
* NVX more cables for the extra amps.
They should be here in the next few months so I will be posting some photos of those so everyone can see.

If you need ask anything just comment down below or on the youtube channel

thank you I hope this post will be helping in the long run.
PS this will take time.

so I got a sponsor for the sound proofing/deadener.
These are the sample products I received and also will be using in my 370z.
I will be using around 36 sheets of dyno mat and 6 sheets of acoustic underlay. The acoustic underlay is the thick dyno mat in the photos. this also makes it soft when you put your feet down in the car.
The acoustic underlay is only going on the front area of the car at the foot well. What I have left over will go to other areas in the car, maybe the back since the sub will be there.

I'm in for pics.....

No worries Ronrizz
I will post a few tomorrow

Vibe Black airs 6x9
 

here is some of photos of my front door speakers,
Vibe Black airs 6x9
◾Speaker Size: 6.25 x 9.25″ (150 x 222mm)
◾175 watts RMS
◾525 watts PEAK
◾Frequency Response: 50Hz-25KHz

not sure why the photos are upside down. I don't know how to fix it :(

VIBE Power Cap 3.0
 

Attachment 108638
Attachment 108639
Attachment 108640
Attachment 108641
VIBE Power Cap 3.0
helps the sub get all the power it needs so I don't lost bass and headlights dim and inside electronics to cut out.

◾» Digital Display 10 – 18 volts.
◾» Reverse polarity protection.
◾» Power distribution block allows 2 x 4 AWG negative inputs.
◾» 2 x 4 AWG positive inputs and 2 x 8 AWG positive inputs.
◾» Ideal for bass systems that typically struggle with poor current delivery from the battery.

Turn computer upside down, or hang by ankles from ceiling to view.

hahaha ,
no joke I have tried everything. I post the photo up right didn't work. post the photo upside down and stay upside down.. its a pain .

AZZA, do not use a capacitor! No need for one and your putting strain on your charging system for no reason.

He speaks the truth. Your amp has all the capistance it needs. They are strictly " jewelry" for your install.
FYI, the hid headlights are ballast controlled, so if they start dimming, you have bigger issues than too much bass!! Lol

oh k thanks guys . well with my sub is 4500 watts peak, I bought a new one.. The system has a lot of speakers you don't think it will put to much stain on the Alternator and battery?.
What I said in the video was from my last car. The skyline r34 use to dim a lot when the sub kicks in. The skyline only had 90amp Alternator whats the 370zs one?

Your sub may be 4500 watts power handling, but your Kenwood amp is only rated at 500 to 4 ohms, 900 at 2, so you will be just fine without a cap, or an alternator upgrade. I believe it is a 150 amp alternator....

well an upgraded alternator is around $600 for 270 amps from nations starter & alternator. The kenwood amp is 900 at 2 ohms. The sub is 4500 peak and 1500 rms. That meaning the amp couldn't keep up for what the sub can take. I don't mind buying a new amp anyways . Also Ron we cant forget the other 2 amps and rest of the speakers. Also that's right 150 amp stock.