OMFG!!! Idiots... Dent my rear quarter.

Milenko2121 · 08-19-2010, 04:19 PM

Go to grab a soda, come out, and see this on my car...
Looks like an ******* hit my car with their door, noticed, and sped off before I came out.

Does anyone know how do fix this, and how much it would cost me?

ZeeCar · 08-19-2010, 04:27 PM

SUCKS!!!

Pretty positive a paintless dent removal service should be able to get that out. Much cheaper/better alternative to respray for dents like that.

AdamsPolishes · 08-19-2010, 05:23 PM

Oh man... I hate that, people just have no respect for nice cars anymore.

I agree with ZeeCar, that looks 'round' enough that a good PDR guy could remove any trace it was ever there probably only cost you around $100 or less IMO. Had a similar ding taken out of my TBSS and the guy charged me $75. When he was done I couldn't even find where it was.

tjlazer · 08-19-2010, 05:39 PM

I have one in the same spot but mine is very minor. I was quoted $100 for PDR. They would have to drill in the wheel liner to get access though. People suck

Milenko2121 · 08-19-2010, 09:20 PM

Quote:

Originally Posted by tjlazer

I have one in the same spot but mine is very minor. I was quoted $100 for PDR. They would have to drill in the wheel liner to get access though. People suck

Are they able to fill the hole they have to drill with no problems?

cajunz · 08-19-2010, 09:37 PM

I'd check with the store to see if they have security cams to see if you could get a license plate for the low life that did that.

Xan · 08-19-2010, 09:38 PM

Quote:

Originally Posted by Milenko2121

Are they able to fill the hole they have to drill with no problems?

Isn't the fender just bolted on? Maybe a little more work, but I would unbolt it.

Milenko2121 · 08-19-2010, 10:29 PM

Quote:

Originally Posted by Xan

Isn't the fender just bolted on? Maybe a little more work, but I would unbolt it.

I hear it's welded on, so no unbolting there.

Quote:

Originally Posted by cajunz

I'd check with the store to see if they have security cams to see if you could get a license plate for the low life that did that.

They didn't catch it on camera... Was one of those times the camera is pointed at the wrong spot at the wrong time.

Xan · 08-19-2010, 10:35 PM

Quote:

Originally Posted by Milenko2121

I hear it's welded on, so no unbolting there.

They didn't catch it on camera... Was one of those times the camera is pointed at the wrong spot at the wrong time.

Sorry I meant the wheel liner... (you're right on the fender, you can't remove without cutting it out)

Milenko2121 · 08-19-2010, 10:56 PM

Quote:

Originally Posted by Xan

Sorry I meant the wheel liner... (you're right on the fender, you can't remove without cutting it out)

Hmm, not sure, haven't looked for ways to unbolt the liner, I will tomorrow when I have some light and not so tired.

metz · 08-19-2010, 11:04 PM

They usually drill a hole then plug it with a rubber plug. If you can get access to the back that's all they need.

specZ · 08-20-2010, 12:54 AM

Quote:

Originally Posted by Milenko2121

I hear it's welded on, so no unbolting there.

They didn't catch it on camera... Was one of those times the camera is pointed at the wrong spot at the wrong time.

The fender is about the flimsiest sheet metal panel found on the car and its bolted on,not welded,which is also how it got dinged so easily. PDR should be able to take that out, although its hard to tell from your pics if the body line was pushed in as well, in which case it would cost a little more. In any case, Sorry to see that

metz · 08-20-2010, 01:22 AM

By fender they mean that's the rear quarter or rear fender.

08-19-2010, 04:27 PM	#2 (permalink)
ZeeCar Base Member Join Date: Jul 2010 Location: Federal Way, WA Posts: 26 Drives: 2010 370z PW 6MT Rep Power: 16	SUCKS!!! Pretty positive a paintless dent removal service should be able to get that out. Much cheaper/better alternative to respray for dents like that. __________________ 2010 370z PW 6MT She's Still a Virgin

08-19-2010, 05:23 PM	#3 (permalink)
AdamsPolishes The370Z.com Sponsor Join Date: Apr 2010 Location: SoCal Posts: 724 Drives: 2009 Avalanche Rep Power: 18	Oh man... I hate that, people just have no respect for nice cars anymore. I agree with ZeeCar, that looks 'round' enough that a good PDR guy could remove any trace it was ever there probably only cost you around $100 or less IMO. Had a similar ding taken out of my TBSS and the guy charged me $75. When he was done I couldn't even find where it was. __________________ Use the code NISSANZ* at checkout to save 10% off your next order at www.AdamsPolishes.com*

08-19-2010, 05:39 PM	#4 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 54 Posts: 2,497 Drives: Z34, R35 Rep Power: 21	I have one in the same spot but mine is very minor. I was quoted $100 for PDR. They would have to drill in the wheel liner to get access though. People suck __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear Quarter Panel	shoopajae10	Exterior & Interior	33	02-16-2012 04:45 AM
rear quarter panel removal	Snakes709	Exterior & Interior	3	07-04-2010 01:38 PM
OMFG :PPPP drools	Gunzero	Other Vehicles	18	06-22-2010 07:54 AM
Idiots on Youtube	tooohip	Mid-Atlantic Region	10	06-03-2010 02:39 PM
I hate idiots.	whoady4shoady	Nissan 370Z General Discussions	3	09-24-2009 07:27 PM

08-19-2010, 09:37 PM	#6 (permalink)
cajunz Base Member Join Date: Apr 2009 Location: Vernal, Ut Posts: 92 Drives: '09 370Z MB 6MT Rep Power: 18	I'd check with the store to see if they have security cams to see if you could get a license plate for the low life that did that.

08-19-2010, 11:04 PM	#11 (permalink)
metz Enthusiast Member Join Date: Mar 2010 Location: Baton Rouge Posts: 347 Drives: 05 Roush, 2010 40th Rep Power: 17	They usually drill a hole then plug it with a rubber plug. If you can get access to the back that's all they need.

08-20-2010, 01:22 AM	#13 (permalink)
metz Enthusiast Member Join Date: Mar 2010 Location: Baton Rouge Posts: 347 Drives: 05 Roush, 2010 40th Rep Power: 17	By fender they mean that's the rear quarter or rear fender.