Nissan 370Z Forum  

Diagnostic Trouble codes

Touble codes on my 2010 370z Can anyone help out on this, My Z is in Limp mode. I have changed out computer for the VVEL, still an issue I

Go Back   Nissan 370Z Forum > 370Z Forum > Announcements


Like Tree1Likes
  • 1 Post By SonicVQ

Reply
 
LinkBack Thread Tools Display Modes
Old 06-21-2021, 01:31 PM   #1 (permalink)
Base Member
 
ZGhost!'s Avatar
 
Join Date: Apr 2021
Location: Kentucky
Posts: 2
Drives: 2010 370z White auto
Rep Power: 3
ZGhost! is on a distinguished road
Default Diagnostic Trouble codes

Touble codes on my 2010 370z

Can anyone help out on this, My Z is in Limp mode. I have changed out computer for the VVEL, still an issue
I see I am having issues with communications
U1000 CAN communications Line Signal Malfunction

M56_AT
U1003 Lost Communications with VVEL control Module
P1606 VVEL Control Module Malfunction
P1421 Cold Start Control

I have taken out and cleaned each fuse and relay under the hood as well with electrical cleaner. Does any one have the 370z grounds diagram?

Last edited by ZGhost!; 06-21-2021 at 02:12 PM.
ZGhost! is offline   Reply With Quote
Old 06-21-2021, 03:57 PM   #2 (permalink)
Premium Member
 
SouthArk370Z's Avatar
 
Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324197
SouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond repute
Default

Wiring diagrams, connector pinouts, wire colors, etc are in the FSM. Link in my sig.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma
SouthArk370Z is offline   Reply With Quote
Old 09-21-2021, 08:28 AM   #3 (permalink)
Base Member
 
ZGhost!'s Avatar
 
Join Date: Apr 2021
Location: Kentucky
Posts: 2
Drives: 2010 370z White auto
Rep Power: 3
ZGhost! is on a distinguished road
Default

I have replaced the VVEL module, both relays, cleaned the 2-Cam sensors. Same two codes P1606 and U1003. I am reading about the negative battery post and the screw could be causing the issues. Also consider the ECM was even remapped.
ZGhost! is offline   Reply With Quote
Old 09-21-2021, 10:55 AM   #4 (permalink)
Base Member
 
Join Date: Jan 2016
Location: Ontario
Posts: 230
Drives: G37 Sport
Rep Power: 6720
SonicVQ has a reputation beyond reputeSonicVQ has a reputation beyond reputeSonicVQ has a reputation beyond reputeSonicVQ has a reputation beyond reputeSonicVQ has a reputation beyond reputeSonicVQ has a reputation beyond reputeSonicVQ has a reputation beyond reputeSonicVQ has a reputation beyond reputeSonicVQ has a reputation beyond reputeSonicVQ has a reputation beyond reputeSonicVQ has a reputation beyond repute
Default

Assuming that the replacement VVEL module is good, I would focus on the wiring. Verify the module has 12v on pin 1, 8 and 13 with ignition on, engine off. Make sure to use the ground on pin 14.


Pins 11 and 24 are the dedicated CAN bus that runs from the ECU to the VVEL module.
• With the battery disconnected, the resistance between pins 11 and 24 should be around 60 ohms. This verifies the CAN bus wires and proper bus termination.

• With the battery connected and engine running, check the voltage between pin 11 + 14 (ground) and pin 24 + 14 (ground)

You should see around 2.2V for CAN-Low and 2.7V for CAN-High.
sx moneypit likes this.
SonicVQ is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help with Airbag Diagnostic Code vidwiz Exterior & Interior 11 09-22-2020 01:55 AM
TOAD diagnostic scanner Akshaya Engine & Drivetrain 15 07-17-2018 04:18 PM
Codes and more Codes? now no start... instroke Forced Induction 15 10-15-2015 10:51 PM
Diagnostic software? ARFCOM Nissan 370Z General Discussions 6 08-01-2010 01:52 PM
Having trouble picking a Z.. and having trouble with the manual AceSpade77 Nissan 370Z General Discussions 12 08-04-2009 04:02 PM


All times are GMT -5. The time now is 07:59 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2