Nissan 370Z Forum - View Single Post

Mike · 06-24-2009, 10:50 AM

I didn't use any camber arms or anything, just the springs.

I would post the alignment sheet, but they had to enter it into the computer as a 350Z, so it looks like everything is out of whack. I did give them the suspension specs I found here, and they were able to get everything into spec with the exception of rear camber.

Rear camber should be -1.17 to -2.16 and mine is -2.4 on the left and -1.9 on the right. Not too bad, and it should do without further adjustments, as all of the cross camber and cross caster, etc is all balanced out.

06-24-2009, 10:50 AM	#1 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	alignment results after eibachs I didn't use any camber arms or anything, just the springs. I would post the alignment sheet, but they had to enter it into the computer as a 350Z, so it looks like everything is out of whack. I did give them the suspension specs I found here, and they were able to get everything into spec with the exception of rear camber. Rear camber should be -1.17 to -2.16 and mine is -2.4 on the left and -1.9 on the right. Not too bad, and it should do without further adjustments, as all of the cross camber and cross caster, etc is all balanced out. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968