Quote:
Originally Posted by RockStarKick
Ok, here is what I did...
The fender liner is actually 2 pieces, locate at the top of the inner wheel well where the
fender liner is separated.
Take out the 2 clips near the split of the two.
I worked my way down the fender liner toward the front of car, taking out clips and pulling the fender liner from the bumper.
|
All Done. I took your advice and removed the top clips to pull the liner down from the top. It is very obstructive with the wheel in place, so I ended up taking the wheels off. The other side was a sinch, 15 minutes swap even with taking the wheel off & on.
Tip: Turn housing counter-clockwise to remove
I love the look. Here is a picture after the install.
