Nissan 370Z Forum - View Single Post

Justin1686 · 02-15-2011, 03:53 PM

Hey everyone, I've read the Swift Swing Review thread enough times to have practically decided on getting them over all the other lowering springs, for those about to say to get coilover's, not within reason $$ wise, thanks though.

My question goes out to hopefully at least a few people in our area. I measured underneath my car before, and have just about 4-4.25 inches of clearance at the lowest point between ground and by Berk exhaust. I'm sure there is no one with the same exhaust AND the swift springs installed.

But I was curious for those of you that might have the Swift's installed, hows your clearance and scrapping?

Thanks.

02-15-2011, 03:53 PM	#1 (permalink)
Justin1686 Track Member Join Date: Apr 2009 Location: Nassau, NY Age: 37 Posts: 689 Drives: 09 370 PG AT Rep Power: 17	Swift Springs Hey everyone, I've read the Swift Swing Review thread enough times to have practically decided on getting them over all the other lowering springs, for those about to say to get coilover's, not within reason $$ wise, thanks though. My question goes out to hopefully at least a few people in our area. I measured underneath my car before, and have just about 4-4.25 inches of clearance at the lowest point between ground and by Berk exhaust. I'm sure there is no one with the same exhaust AND the swift springs installed. But I was curious for those of you that might have the Swift's installed, hows your clearance and scrapping? Thanks. __________________ 2009 Touring & Sport Package \|\| Platinum Graphite \|\| 40% 3M Tint \|\| Xpel Clear Bra \|\| Berk CBE \|\| Berk HFC \|\| Stillen Sway Bar \|\| H&R Spacers \|\| Swift Springs \|\| SPC Rear Camber Kit \|\| Thanks to Savage Autosports, VTR, PM, and R.A.D.