Quote:
Originally Posted by bigaudiofanat
No stock wiring to the rear speakers on the base system. You would have to run two wires to the front and clip 4 wires in total into the stock wiring harness in order for this to work with a stock head unit. IMO and some others rear speakers harm the good sound stage of a small car.
|
Remember, if doing this with a stock base HU, the rear channels ARE available from the HU, just need to add pins to the vehicle connector. This way the fader can be used to control the amount of rear fill desired. I suspect just wiring them into the stock HU front channel would yield less than wonderful results.... and the parallel connection of 3 sets of speakers might result in dangerously low impedance presented to the HU power amp.