View Single Post
Old 01-12-2011, 07:35 PM   #3 (permalink)
Fred@ReverseLogic
Base Member
 
Join Date: Oct 2010
Location: Philadelphia
Posts: 50
Drives: competitors crazy
Rep Power: 9
Fred@ReverseLogic is on a distinguished road
Default Final dimensions for RLL-87-2 Two-Stage Incline Race Ramps

I now have a final dimensions for the RLL-87-2 two-piece, two-stage incline Race Ramps. For those familiar with the Race Ramps product line, this new design is essentially an RR-XT-2 67" two-piece Race Ramp with an integrated RR-EX-14 XTender.

The overall length of the ramps is 87". The platform section is 30" long and the incline section is 63" long including the 6" interlock. The ramps are 10" high and 14" wide just like the standard RR-XT-2 product. The approach angle is just 6.8 degrees compared to 10.7 degrees on the standard RR-XT-2. The stop at the top of the ramp has been reduced from 3" to 2" high.

If you have 3.5" of ground clearance 24" in front of your front tire foot print, then the RLL-87-2 ramps will fit under your car. You need about 5" of clearance at 24" to use the RR-XT-2 67" ramps.

I expect to be shipping the RR-87-2 ramps within the next two weeks. I will post specs for the 8" high version of the ramps later this week.

The ramps I previously referenced as RLL-80-2 will not make it into production.
Attached Files
File Type: pdf RLL-87-2.pdf (27.7 KB, 14 views)
__________________

www.ReverseLogic.us

Last edited by Fred@ReverseLogic; 01-21-2011 at 08:25 PM.
Fred@ReverseLogic is offline