Nissan 370Z Forum - View Single Post

semtex · 06-08-2009, 02:17 PM

I'd check this hole here (behind the fender liner of the front-right wheel well). Normally, there's a grommet in it, but in this pic it's pulled out because I'm about to route wires through it:

Here's where it leads to on the other side. If it's not properly sealed, I could see how water would come through and soak the carpet:

06-08-2009, 02:17 PM	#9 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	I'd check this hole here (behind the fender liner of the front-right wheel well). Normally, there's a grommet in it, but in this pic it's pulled out because I'm about to route wires through it: Here's where it leads to on the other side. If it's not properly sealed, I could see how water would come through and soak the carpet: __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.