Quote:
Originally Posted by azn370z
You don't know which corner the noise is coming from? Did you preload the rear springs? Put the z on jack stands, don't take the wheels off and pull on the springs, if it moves you need to preload them again.
|
Yeah, sorry, its coming from the RF. It sounds like its the upper part of the tower.
After a couple of phone calls, I'm going to take the shock off and check to see if the nut holding the top mount plate and bearing are tight while also checking for play in the bearing to see if its bad.
I did preload the rears.
This is with 10K/12K Swift springs too. The fronts came preloaded and assembled from BC.
I've pulled on the springs, the shock, the A-arm, the sway, the tire, the hub...everything is tight. I have quadruple checked all my nuts and bolts.
__________________
2009 PG 6spd Sport || 30% side tint, 15% rear || All Redline fluids || Berk HFC's intalled~PITA Bolt
|| Stillen G3's || Berk CBE || BC Racing Coilovers with 10K/12K Swift springs & RA valving|| SPL rear camber arms || 20mm/15mm spacers