Quote:
Originally Posted by wheee!
So you are thinking of a relay or circuit to enable vss off in the forward position instead of vss on? That would make sense.
As for the individual pins to the switch, I am fine with that...
|
Correct on the relay. On the second point I think I may have found the connector for the switch but will need to order one to be sure.
Before I get carried away I want to check on the budget side of things. The harness is actually bigger than the backup camera one with 32 pins vs 24 pins and therefore more time consuming to make (and the backup camera one wasn't quick).
I think the harness is going to come it at about $100 (maybe a little more) and then remote solution will add about $50 and the heated seat switch, connector and relay circuit will be about the same ~$50. $150 for the kit (either switch or remote_ seems expensive to me when it could be achieved for a lot less, but just not plug and play but that is what it is going to take for a plug and play solution.
What do you guys think?