Drawings for 2-piece, 2-stage incline Race Ramps
Here are two drawings with the dimensions of the new ramps. We expect some minor changes before the ramps go into production in December. But, the incline portion of the ramp will not change. The angle numbers on the drawing are rounded. The actual angles are 6.8 degrees and 10.75 degrees.
The width of the RLL-80-2 ramps is 14" and the width of the RLL-65-2 ramps is 12". The height of the RLL-65-2 ramp at the point where the angle changes from 6.8 to 10.75 degrees is about 3.3". This point is 25" from the leading edge of the ramp. The height of the RLL-80-2 ramp at the point where the incline rate changes is about 5". This is 38" from the start of the ramp.
Last edited by Fred@ReverseLogic; 01-21-2011 at 08:22 PM.
|