Thread: Bent rear under brace from jacking the car at wrong jacking point.
View Single Post
Old 10-12-2010, 12:59 AM   #1 (permalink)
IS2000
Base Member
 
IS2000's Avatar
 
Join Date: Oct 2010
Location: Bangkok, Thailand
Posts: 41
Drives: 09 370Z version ST.
Rep Power: 14
IS2000 is on a distinguished road
Angry Bent rear under brace from jacking the car at wrong jacking point.
I went under my Z today and found 2 dents on the the rear undercar brace (one on each side of the car). A local shop here probably used the brace as jacking points instead of the chassis rails. Should I be worried of the damage? Does this affect the rigidity of the car, or is it purely cosmetic? I also noticed on the right side, the brace touches the gas tank, while on the left these is about 2-3mm of gap in between them.
First two pics below are the right rear and the rest are the left rear.
Attached Images
File Type: jpg P1010415.JPG (521.1 KB, 301 views)
File Type: jpg P1010416.JPG (510.0 KB, 198 views)
File Type: jpg P1010417.JPG (517.4 KB, 210 views)
File Type: jpg P1010418.JPG (492.9 KB, 172 views)
__________________
09' JDM 370Z Version ST.
08' Mini Cooper S
03' USDM EVO8
IS2000 is offline   Reply With Quote