Yea i know he did it on the drivers side.... but before i saw that post i ran mine on the battery side which is on the passenger side. if you take off the paneling in that area, you will see a bundle of wires that is wrapped in a rubber like fitting that enters the car. I push the power wire through that and wrapped it with electrical tape. Also you'll notice that there is some sticky black like material that seals the rubber to the wires. This is where i ran my power. I am not sure if you know but from what i've read you should ground all ur electronics at the same place. So i ran the ground from my h/u to the ground where for my amps. I also ran the rem wire with that ground wire which is also with the amp power wire. I then ran the signal wires on the drivers side of the car. Hope this helps.
David
|