Used this DIY as a baseline for my V1 install today, good stuff! Thanks OP. One thing I came across that concerned me was that all the MINI Add-a-line's I found at the local parts stores were only rated to 10Amps and this DIY was using the 15Amp slot for the cig lighter. As a precautionary measure I decided to tap into the 10Amp slot just below the 15A called out here. This is the 10Amp that is marked "audio/mirror". I did a test hook-up before running all the wires and it seems to work just fine. Anyone else run into/notice this during their installs?
|